Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old January 13th 04, 07:43 AM
DC
 
Posts: n/a
Default Adding an IF output

I have an IC-290A to which I'd like to add a 10.7mhz IF output. I need
bandwidth of about 1mhz and it appears the best place to get this
signal is off of the mixer output pin. How should this output be
coupled to the mixer output? Is any isolation necessary? What should
I know before I attempt this? (I can solder well, etc...)
73s,
David Carr
KD5QGR
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding an IF output DC Equipment 4 January 13th 04 05:18 PM
Reflection Coefficient Smoke Clears a Bit Dr. Slick Antenna 126 September 10th 03 04:26 PM
Help with TS-930S Power Output tim english Equipment 4 July 27th 03 04:31 PM
Help with TS-930S Power Output tim english Equipment 0 July 26th 03 11:52 AM


All times are GMT +1. The time now is 12:56 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017