TS-450 SAT Battery
 

Does anybody know if there is a battery holder that can replace the
soldered in battery so future replacement will be easier?
Please reply to group.

TNX and 73

Don't know if there is a direct holder that will fit, but what I did was
'outboard' a battery holder with a pair of wires. Of course the old holder
was removed, and the wires soldered into place. The 'new' holder is tucked
in the radio towards the back. To replace the battery, I pull the cover,
pull the new holder up and replace the battery and tuck the new battery back
into place. This procedure and idea is published on the Web, for a different
but similar Kenwood. Can't find it now.


"OccamsRazor" wrote in message
...
Does anybody know if there is a battery holder that can replace the
soldered in battery so future replacement will be easier?
Please reply to group.

TNX and 73

Don't know if there is a direct holder that will fit, but what I did was
'outboard' a battery holder with a pair of wires. Of course the old holder
was removed, and the wires soldered into place. The 'new' holder is tucked
in the radio towards the back. To replace the battery, I pull the cover,
pull the new holder up and replace the battery and tuck the new battery back
into place. This procedure and idea is published on the Web, for a different
but similar Kenwood. Can't find it now.


"OccamsRazor" wrote in message
...
Does anybody know if there is a battery holder that can replace the
soldered in battery so future replacement will be easier?
Please reply to group.

TNX and 73

How hard is it to solder in a battery every 10-15 years??

--
Clif Holland, KA5IPF
AVVid
Authorized Kenwood and Icom Service Center
816 W Shady Grove Rd
Irving, TX 75060

www.avvid.com

1-800-214-5779
972-870-0630 (Local)
"OccamsRazor" wrote in message
...
Does anybody know if there is a battery holder that can replace the
soldered in battery so future replacement will be easier?
Please reply to group.

TNX and 73

How hard is it to solder in a battery every 10-15 years??

--
Clif Holland, KA5IPF
AVVid
Authorized Kenwood and Icom Service Center
816 W Shady Grove Rd
Irving, TX 75060

www.avvid.com

1-800-214-5779
972-870-0630 (Local)
"OccamsRazor" wrote in message
...
Does anybody know if there is a battery holder that can replace the
soldered in battery so future replacement will be easier?
Please reply to group.

TNX and 73

Thanks for your input. Kenwood doesn't know of a direct replacement but
sometimes third parties do, so I thought I would just put the question out
there. I guess that many newer radios have a holder installed to make it
easier on the consumer.
Thanks again.
"Jim Leder" wrote in message
...
Don't know if there is a direct holder that will fit, but what I did was
'outboard' a battery holder with a pair of wires. Of course the old holder
was removed, and the wires soldered into place. The 'new' holder is tucked
in the radio towards the back. To replace the battery, I pull the cover,
pull the new holder up and replace the battery and tuck the new battery
back
into place. This procedure and idea is published on the Web, for a
different
but similar Kenwood. Can't find it now.


"OccamsRazor" wrote in message
...
Does anybody know if there is a battery holder that can replace the
soldered in battery so future replacement will be easier?
Please reply to group.

TNX and 73

Thanks for your input. Kenwood doesn't know of a direct replacement but
sometimes third parties do, so I thought I would just put the question out
there. I guess that many newer radios have a holder installed to make it
easier on the consumer.
Thanks again.
"Jim Leder" wrote in message
...
Don't know if there is a direct holder that will fit, but what I did was
'outboard' a battery holder with a pair of wires. Of course the old holder
was removed, and the wires soldered into place. The 'new' holder is tucked
in the radio towards the back. To replace the battery, I pull the cover,
pull the new holder up and replace the battery and tuck the new battery
back
into place. This procedure and idea is published on the Web, for a
different
but similar Kenwood. Can't find it now.


"OccamsRazor" wrote in message
...
Does anybody know if there is a battery holder that can replace the
soldered in battery so future replacement will be easier?
Please reply to group.

TNX and 73

Thanks for your reply. I'm sure that Kenwood will be very pleased with the
customer service and courtesy you provide as an authorized service center
when I foreword your response to them.

"Clif Holland" wrote in message
...
How hard is it to solder in a battery every 10-15 years??

--
Clif Holland, KA5IPF
AVVid
Authorized Kenwood and Icom Service Center
816 W Shady Grove Rd
Irving, TX 75060

www.avvid.com

1-800-214-5779
972-870-0630 (Local)
"OccamsRazor" wrote in message
...
Does anybody know if there is a battery holder that can replace the
soldered in battery so future replacement will be easier?
Please reply to group.

TNX and 73

Thanks for your reply. I'm sure that Kenwood will be very pleased with the
customer service and courtesy you provide as an authorized service center
when I foreword your response to them.

"Clif Holland" wrote in message
...
How hard is it to solder in a battery every 10-15 years??

--
Clif Holland, KA5IPF
AVVid
Authorized Kenwood and Icom Service Center
816 W Shady Grove Rd
Irving, TX 75060

www.avvid.com

1-800-214-5779
972-870-0630 (Local)
"OccamsRazor" wrote in message
...
Does anybody know if there is a battery holder that can replace the
soldered in battery so future replacement will be easier?
Please reply to group.

TNX and 73

"OccamsRazor" wrote in message
...
Does anybody know if there is a battery holder that can replace the
soldered in battery so future replacement will be easier?
Please reply to group.

Use the battery and holder from an old motherboard.