Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old February 24th 04, 01:10 AM
Ed G
 
Posts: n/a
Default


I'm holding on to mine to sell with the rig it came with. I don't
expect to use it because it seems to raise the noise level in the
receiver.

It isn't as bad as the MFJ switcher, which is much better than the
Radio Shack, but it is bad enough that I can tell the difference
between it and a linear supply!



Personally, I've always used a 12V battery... currently a 100AH gell
cell. No noise there at all! Just built a little home brew 4A 13.6V
regulated power supply to float the battery with and it NEVER fails,
power outages or whatever. Been so reliable I have held off for years
installing a solar panel in place of the little P/S.


Ed WB6SAT
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB - Icom AD 20 and Icom BP 90 David Bell Equipment 0 December 2nd 03 04:24 AM
WTB - Icom AD 20 and Icom BP 90 David Bell Equipment 0 December 2nd 03 04:24 AM
Icom T2H ANI Mode Michael Ko Equipment 10 October 23rd 03 07:59 PM
f.s. Icom 746 and ps125 Lemwnash Equipment 0 September 20th 03 06:03 PM
f.s. Icom 746 and ps125 Lemwnash Equipment 0 September 20th 03 06:03 PM


All times are GMT +1. The time now is 08:16 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017