Wouxun KG UVD1P
 

I was wondering if anyone has been programming the Wouxun handheld via a
computer using Wouxun's software.

I eventually got all installed and working, however when I got to print out
the details of the frequencies which I had programmed and saved to the hand
held (about 120) the print program only allows 3 pages rather than 4 to be
printed.

Despite a few emails to Wouxun in China they cannot shed any light on as to
why the 4 pages don't print. I suggested that they had a problem with the
program and that bought a swift and rapid denial!

I have tried the program on 3 different computers in 3 different locations
but to no avail.

They use a .tw as a file extension, and despite trying many programs nothing
will open it, as I thought I could do a cut and paste into an Excel file,
but cutting from the matrix and pasting to Excel is not accommodated.

73
John
VK2KC

Wouxun KG UVD1P
 

"VK2KC Gmail" wrote in message
...
I was wondering if anyone has been programming the Wouxun handheld via a
computer using Wouxun's software.

I eventually got all installed and working, however when I got to print
out the details of the frequencies which I had programmed and saved to the
hand held (about 120) the print program only allows 3 pages rather than 4
to be printed.

Despite a few emails to Wouxun in China they cannot shed any light on as
to why the 4 pages don't print. I suggested that they had a problem with
the program and that bought a swift and rapid denial!

I have tried the program on 3 different computers in 3 different locations
but to no avail.

They use a .tw as a file extension, and despite trying many programs
nothing will open it, as I thought I could do a cut and paste into an
Excel file, but cutting from the matrix and pasting to Excel is not
accommodated.

73
John
VK2KC

I managed to convince Wouxun that they have a problem with their program,
and have promised me with a fix, took 5 emails to convince them!
73
John
VK2KC

Wouxun KG UVD1P
 

VK2KC Gmail wrote:


I managed to convince Wouxun that they have a problem with their program,
and have promised me with a fix, took 5 emails to convince them!
73
John
VK2KC


Excellent. 5 ain't bad these days.

Wouxun KG UVD1P
 

On Aug 28, 12:22*pm, "VK2KC Gmail" wrote:
"VK2KC Gmail" wrote in message
Despite a few emails to Wouxun in China they cannot shed any light on as
to why the 4 pages don't print. I suggested that they had a problem with
the program and that bought a swift and rapid denial!
VK2KC

I managed to convince Wouxun that they have a problem with their program,
and have promised me with a fix, took 5 emails to convince them!

Well, hopefully they'll come good with a fix. I have two of these
handhelds myself, but I'll admit I've never tried using the PC
software for them. I hand-programmed one (using keypad) with the
frequencies I wanted (almost filled all 128 channels... they could use
more), then constructed a cloning cable to program the second one.

http://stuartl.longlandclan.yi.org/b...uxun-kg-uvd1p/
describes the wiring of the cloning cable, should you ever need one.

What verison of Software are you using? Like be know if I have the latest. I deal with these people on a daily base! As I am one of the largest overseas dealers! I will gladly send you a frish copy on the software! (Free)
KoolKatz

Wouxun KG UVD1P
 

I am using KG-UVD1Pv1.16
Is there a later edition?

Do you have the problem of printing the whole frequency list, even with the
latest edition the software only prints 3 pages, when 4 is the complete
list.
John



"KoolKatz" wrote in message
...

What verison of Software are you using? Like be know if I have the
latest. I deal with these people on a daily base! As I am one of the
largest overseas dealers! I will gladly send you a frish copy on the
software! (Free)
KoolKatz




--
KoolKatz