Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
That feature seems to be a common characteristic of Japanese manuals. I
repaired a Kenwood 440 for a friend. Looked all over for instructions of how to set up one of the oscillators. Not mentioned in the index or anywhere in the text. Appeared as a note on the schematic. Only took a couple of extra hours to find it. Same manual lists every metric screw, nut and washer in painful detail. Why? -- Crazy George Remove N O and S P A M imbedded in return address "phoneguy99" wrote in message ... After re-reading the manual (and an hour or two of net surfing) it turns out the reference frequency is tweakable via the TT remote command set. More than ample adjustment to get it spot on. (...I really have to learn to not read manuals when I'm over-tired. It was there in a table. No reference to the feature in the manual, but it was listed as a command none the less...) Thanks to all who read my original post. Pat |
#2
![]() |
|||
|
|||
![]()
On Sun, 11 Apr 2004 20:21:48 -0500, "Crazy George"
wrote: That feature seems to be a common characteristic of Japanese manuals. I repaired a Kenwood 440 for a friend. Looked all over for instructions of how to set up one of the oscillators. Not mentioned in the index or anywhere in the text. Appeared as a note on the schematic. Only took a couple of extra hours to find it. Same manual lists every metric screw, nut and washer in painful detail. Why? Hi George, This was also an American specialty from the likes of Intel in the late seventies. If there was any important feature deserving mention, such was done "somewhere" - once. 73's Richard Clark, KB7QHC |
#3
![]() |
|||
|
|||
![]()
On Sun, 11 Apr 2004 20:21:48 -0500, "Crazy George"
wrote: That feature seems to be a common characteristic of Japanese manuals. I repaired a Kenwood 440 for a friend. Looked all over for instructions of how to set up one of the oscillators. Not mentioned in the index or anywhere in the text. Appeared as a note on the schematic. Only took a couple of extra hours to find it. Same manual lists every metric screw, nut and washer in painful detail. Why? Hi George, This was also an American specialty from the likes of Intel in the late seventies. If there was any important feature deserving mention, such was done "somewhere" - once. 73's Richard Clark, KB7QHC |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
HELP: Icom IC-RP1220 (1.2GHz) repeater drifted. | Antenna | |||
Repeater experts....HELP! | Equipment | |||
Repeater experts....HELP! | Equipment |