Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old April 27th 04, 02:59 AM
Dave
 
Posts: n/a
Default Help! IC-706MKIIg has started turning itself off!

I have a IC-706-mkIIg that I have owned for about three years that has
always worked perfectly.

It recently has started to power itself off for no apparent reason
after being on for a minute or two. It behaves as if it is going
through the automatic shutdown which is set for 60 minutes of no
activity.

When it is on, it seems to be functioning normaly, transmits and
receives fine.

I thought at first that maybe the CPU just got scrambled so I tried a
complete power-on reset to reset the CPU but it still does it. There
is no obvious sign of overheating and my SWR is fine. (It powers
itself off even if there has been no transmitting.

I just wondered if anyone had any ideas about this before I send it
into ICOM for service.

Thanks for your thoughts,

Dave WK8F

  #2   Report Post  
Old April 27th 04, 03:59 AM
Z.Z.
 
Posts: n/a
Default

Dave wrote:

I have a IC-706-mkIIg that I have owned for about three years that has
always worked perfectly.

It recently has started to power itself off for no apparent reason
after being on for a minute or two. ...

I just wondered if anyone had any ideas about this before I send it
into ICOM for service.


What are you using for a power supply? Might be worth having a look with a
volt meter when the rigs shuts down...
  #3   Report Post  
Old April 27th 04, 03:59 AM
Z.Z.
 
Posts: n/a
Default

Dave wrote:

I have a IC-706-mkIIg that I have owned for about three years that has
always worked perfectly.

It recently has started to power itself off for no apparent reason
after being on for a minute or two. ...

I just wondered if anyone had any ideas about this before I send it
into ICOM for service.


What are you using for a power supply? Might be worth having a look with a
volt meter when the rigs shuts down...
  #4   Report Post  
Old April 27th 04, 09:39 PM
Thierry
 
Posts: n/a
Default


"Dave" wrote in message
...
I have a IC-706-mkIIg that I have owned for about three years that has
always worked perfectly.

It recently has started to power itself off for no apparent reason
after being on for a minute or two. It behaves as if it is going
through the automatic shutdown which is set for 60 minutes of no
activity.

When it is on, it seems to be functioning normaly, transmits and
receives fine.


Hi,

There is in the menu an option to ask the RTX to switvch off after some
time.
I do not rememebr which but if you review all setting you could find it.
I wonder if this is not an option called "TOT" or something like that
http://www.astrosurf.com/lombry/Radi...c-706MKIIG.pdf

Thierry, ON4SKY

I thought at first that maybe the CPU just got scrambled so I tried a
complete power-on reset to reset the CPU but it still does it. There
is no obvious sign of overheating and my SWR is fine. (It powers
itself off even if there has been no transmitting.

I just wondered if anyone had any ideas about this before I send it
into ICOM for service.

Thanks for your thoughts,

Dave WK8F



  #5   Report Post  
Old April 27th 04, 09:39 PM
Thierry
 
Posts: n/a
Default


"Dave" wrote in message
...
I have a IC-706-mkIIg that I have owned for about three years that has
always worked perfectly.

It recently has started to power itself off for no apparent reason
after being on for a minute or two. It behaves as if it is going
through the automatic shutdown which is set for 60 minutes of no
activity.

When it is on, it seems to be functioning normaly, transmits and
receives fine.


Hi,

There is in the menu an option to ask the RTX to switvch off after some
time.
I do not rememebr which but if you review all setting you could find it.
I wonder if this is not an option called "TOT" or something like that
http://www.astrosurf.com/lombry/Radi...c-706MKIIG.pdf

Thierry, ON4SKY

I thought at first that maybe the CPU just got scrambled so I tried a
complete power-on reset to reset the CPU but it still does it. There
is no obvious sign of overheating and my SWR is fine. (It powers
itself off even if there has been no transmitting.

I just wondered if anyone had any ideas about this before I send it
into ICOM for service.

Thanks for your thoughts,

Dave WK8F





  #6   Report Post  
Old April 27th 04, 09:47 PM
Thierry
 
Posts: n/a
Default

This is explained p51 in the referenced PDF file, "6 AUTO OFF"
The initial setting is OFF with a choice between 30, 60, 90 and 120 min
delay.
I think this is the "problem" you have.

Thierry


"Thierry" Use http://www.astrosurf.com/lombry/post.htm to reply wrote in
message ...

"Dave" wrote in message
...
I have a IC-706-mkIIg that I have owned for about three years that has
always worked perfectly.

It recently has started to power itself off for no apparent reason
after being on for a minute or two. It behaves as if it is going
through the automatic shutdown which is set for 60 minutes of no
activity.

When it is on, it seems to be functioning normaly, transmits and
receives fine.


Hi,

There is in the menu an option to ask the RTX to switvch off after some
time.
I do not rememebr which but if you review all setting you could find it.
I wonder if this is not an option called "TOT" or something like that
http://www.astrosurf.com/lombry/Radi...c-706MKIIG.pdf

Thierry, ON4SKY

I thought at first that maybe the CPU just got scrambled so I tried a
complete power-on reset to reset the CPU but it still does it. There
is no obvious sign of overheating and my SWR is fine. (It powers
itself off even if there has been no transmitting.

I just wondered if anyone had any ideas about this before I send it
into ICOM for service.

Thanks for your thoughts,

Dave WK8F





  #7   Report Post  
Old April 27th 04, 09:47 PM
Thierry
 
Posts: n/a
Default

This is explained p51 in the referenced PDF file, "6 AUTO OFF"
The initial setting is OFF with a choice between 30, 60, 90 and 120 min
delay.
I think this is the "problem" you have.

Thierry


"Thierry" Use http://www.astrosurf.com/lombry/post.htm to reply wrote in
message ...

"Dave" wrote in message
...
I have a IC-706-mkIIg that I have owned for about three years that has
always worked perfectly.

It recently has started to power itself off for no apparent reason
after being on for a minute or two. It behaves as if it is going
through the automatic shutdown which is set for 60 minutes of no
activity.

When it is on, it seems to be functioning normaly, transmits and
receives fine.


Hi,

There is in the menu an option to ask the RTX to switvch off after some
time.
I do not rememebr which but if you review all setting you could find it.
I wonder if this is not an option called "TOT" or something like that
http://www.astrosurf.com/lombry/Radi...c-706MKIIG.pdf

Thierry, ON4SKY

I thought at first that maybe the CPU just got scrambled so I tried a
complete power-on reset to reset the CPU but it still does it. There
is no obvious sign of overheating and my SWR is fine. (It powers
itself off even if there has been no transmitting.

I just wondered if anyone had any ideas about this before I send it
into ICOM for service.

Thanks for your thoughts,

Dave WK8F





  #8   Report Post  
Old April 27th 04, 10:15 PM
Thierry
 
Posts: n/a
Default

Sorry, I didn't read that you already set the delay to 60 min ...
A friend of mine tells me that the IC does not really support too much
moisture compared to its Yaesu competitors and that cause many many
problems, not only with the power with also the impossibility to emit, etc
due to defect relay, etc.
If it worked until now, the most probable explanation 'd be a defect
battery.... :-(

Thierry

"Dave" wrote in message
...
I have a IC-706-mkIIg that I have owned for about three years that has
always worked perfectly.

It recently has started to power itself off for no apparent reason
after being on for a minute or two. It behaves as if it is going
through the automatic shutdown which is set for 60 minutes of no
activity.

When it is on, it seems to be functioning normaly, transmits and
receives fine.

I thought at first that maybe the CPU just got scrambled so I tried a
complete power-on reset to reset the CPU but it still does it. There
is no obvious sign of overheating and my SWR is fine. (It powers
itself off even if there has been no transmitting.

I just wondered if anyone had any ideas about this before I send it
into ICOM for service.

Thanks for your thoughts,

Dave WK8F



  #9   Report Post  
Old April 27th 04, 10:15 PM
Thierry
 
Posts: n/a
Default

Sorry, I didn't read that you already set the delay to 60 min ...
A friend of mine tells me that the IC does not really support too much
moisture compared to its Yaesu competitors and that cause many many
problems, not only with the power with also the impossibility to emit, etc
due to defect relay, etc.
If it worked until now, the most probable explanation 'd be a defect
battery.... :-(

Thierry

"Dave" wrote in message
...
I have a IC-706-mkIIg that I have owned for about three years that has
always worked perfectly.

It recently has started to power itself off for no apparent reason
after being on for a minute or two. It behaves as if it is going
through the automatic shutdown which is set for 60 minutes of no
activity.

When it is on, it seems to be functioning normaly, transmits and
receives fine.

I thought at first that maybe the CPU just got scrambled so I tried a
complete power-on reset to reset the CPU but it still does it. There
is no obvious sign of overheating and my SWR is fine. (It powers
itself off even if there has been no transmitting.

I just wondered if anyone had any ideas about this before I send it
into ICOM for service.

Thanks for your thoughts,

Dave WK8F



  #10   Report Post  
Old April 28th 04, 07:39 PM
Jean-Marie
 
Posts: n/a
Default

Dave wrote in news:95fr80lqq7de9erv4i72fgofaeva1s5ut3@
4ax.com:

It recently has started to power itself off for no apparent reason
after being on for a minute or two. It behaves as if it is going
through the automatic shutdown which is set for 60 minutes of no
activity.


I had a similar problem. Solved by cleaning the contacts between the
control head and the body of the radio.

Jean-Marie


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yaesu FT-857 - Help getting started.... Jason Equipment 0 October 9th 03 04:03 PM
Mobile Icom 706MKIIg shielding problem ? Jim Dolson Equipment 6 August 4th 03 12:00 PM
Mobile Icom 706MKIIg shielding problem ? Jim Dolson Equipment 0 August 4th 03 12:25 AM
ICOM 706MKIIG Question Ed Cregger Equipment 0 August 3rd 03 07:11 PM
ICOM 706MKIIG Question Ed Cregger Equipment 0 August 3rd 03 07:11 PM


All times are GMT +1. The time now is 07:44 AM.

Powered by vBulletin® Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2004-2017 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017