Home |
Search |
Today's Posts |
#4
|
|||
|
|||
Forgot to add -- repairing blown finals is VERY expensive unless you can do
it yourself but that can be messy (;-( -- Keyboard In The Noise Opinions are the cheapest commodities in the world. Author unknown but "right on" "Keyboard In The Noise" wrote in message news:4_otc.329$fo5.156@fed1read07... The IC-718 is rated at 100 Watts -- see URL: http://www.qsl.net/sm7vhs/radio/icom/ic718/specs.htm I would be very careful of adjusting it above the manufacurers specs. (;-( I have known folks who did this on other rigs and eventually blew out the finals (:-( Being there is 6dB per S-unit -- increasing power from 100 to 150 Watts (less than 2 dB) will not be noticeable on the receiving end. Your frazzled finals may vary (:-) -- Keyboard In The Noise Opinions are the cheapest commodities in the world. Author unknown but "right on" ------------------------------------------------ "Tallion" http://www.cerbermail.com/?Ks1LNtfOyM wrote in message ... Hi All ! I have a ICOM IC 718 #08 and i obtain only 100 watts max when i adjust R1707 (80 watts on 20 M)while some obtain 200 watts, why ? and how i do for to obtain about 150 watts ? Thanks ! John FBCZ ) |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Reducing IC28H power output | Equipment | |||
Reducing IC28H power output | Equipment | |||
Derivation of the Reflection Coefficient? | Antenna | |||
Help with TS-930S Power Output | Equipment |