You could also come out of the 3/4 " machine with video and audio.(I
doubt that it will be a stereo output) and put that into the ch 3
modulator and you will have ch 3 out. Lenny Stein, Barlen Electronics.
"Kevin Carney" wrote in message ...
Not what you want exactly but, take the RF output and put it into another
VCR. Select Channel 5 on that VCR's tuner. It will now take your old units
Channel 5 and put it out on Channel 3 or 4 (switch selectable). Or use the
newer VCR's A/V inputs if the old unit has A/V outputs. You probably have a
VCR or two lying around, so it won't cost you much.

"DaveC" wrote in message
al.net...
This Panasonic NV-2110 3/4-inch VCR outputs RF on CH 5 or CH 6
(switch-selectable). There is no other choice of output channel. (This is
an
(*old* VCR, circa 1973, much discrete circuitry.)

Is the determination of frequency as simple as changing the xtals for
these
channels? (RF mod circuit uses two xtals for these channels.)

If I want change the circuit such that video is output to RF CH 3 or 4, is
this a straightforward xtal swap? Recal required afterward?

Has anyone done this before?

Thanks,
--
DaveC

This is an invalid return address
Please reply in the news group