| Home |
| Search |
| Today's Posts |
|
#3
September 15th 04, 10:19 PM
|
|||
|
|||
Actually i'm looking for a higer IP3 value: something above 35 or 40 dBm.
At 9MHz, 2.4KHz band, 1.5 form 6:60 factor. Any advice? Thanks Mauro "Harold E. Johnson" wrote in message news:F522d.183558$9d6.151135@attbi_s54... "Mauro" wrote in message ... Does anyone measured the IP3 of the International Radio xtal filter model 2310 (8 poles, 9MHz, 2.4KHz bandwidth)? Thanks. Mauro Don't have any information on that particular filter, but similar inexpensive 9 MHz lattice filters run in the neighborhood of +25 dBm. Largely dependent on the surface finish of the crystals and the frequency as a second order effect. W4ZCB |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 455 kHz CW filter for ICOM | Equipment | |||
| 455 kHz CW filter for ICOM | Equipment | |||
| FT1000, roofing filter ? | Equipment | |||
| IC-706MKIIG AM filter? | Equipment | |||
| IC-706MKIIG AM filter? | Equipment | |||
Threaded Mode
