Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old September 20th 04, 08:19 PM
John Walton
 
Posts: n/a
Default Rig for Peace Corps Vol ?

Looking for a recommendation for a rig for a Peace Corps Volunteer -- hot,
humid environment full of critters.


  #2   Report Post  
Old September 20th 04, 10:21 PM
Minnie Bannister
 
Posts: n/a
Default

IMO, you are going to need something that is legal in the country to
which you are going. Do you know the rules at your destination?

Alan NV8A


On 09/20/04 03:19 pm John Walton put fingers to keyboard and launched
the following message into cyberspace:

Looking for a recommendation for a rig for a Peace Corps Volunteer -- hot,
humid environment full of critters.

  #3   Report Post  
Old September 21st 04, 01:55 AM
asdf
 
Posts: n/a
Default

John Walton wrote:

Looking for a recommendation for a rig for a Peace Corps Volunteer --
hot, humid environment full of critters.



Might want to check with the Peace Corps about it. Back when I was in,
(Dem. Repub. of Congo, 1970-71) they were sensitive about looking like
spies (we were frequently accused of being CIA agents, radio or no) that
they really discouraged ham radio operations. That didn't stop me and
another PCV from operating a missionary's station (9Q5MO, IIRC), a big Swan
rig. It was kinda fun being on the other end of a pile-up.

I would think something like a 706 would be a decent choice. Just make sure
it's legal where you're headed. Make sure you're properly licensed, too.

Where you headed?

Mark AA7TA
  #4   Report Post  
Old September 21st 04, 02:35 AM
Allodoxaphobia
 
Posts: n/a
Default

On Tue, 21 Sep 2004 00:55:52 GMT, asdf hath writ:
John Walton wrote:

Looking for a recommendation for a rig for a Peace Corps Volunteer --
hot, humid environment full of critters.



Might want to check with the Peace Corps about it. Back when I was in,
(Dem. Repub. of Congo, 1970-71) they were sensitive about looking like
spies (we were frequently accused of being CIA agents, radio or no) that
they really discouraged ham radio operations. That didn't stop me and
another PCV from operating a missionary's station (9Q5MO, IIRC), a big Swan
rig. It was kinda fun being on the other end of a pile-up.

I would think something like a 706 would be a decent choice. Just make sure
it's legal where you're headed. Make sure you're properly licensed, too.

Where you headed?


Maybe the IC-703 would be a choice (over the IC-706.) Easier on
whatever batteries or portable power you'll be using -- probably
more forgiving on antenna mis-match -- and, you'll be Sexy DX, so
the lower power won't be a Big Factor. The other folks will bust
their guts to work you (and, you'll find your signal reports will
_always_ be "FIVE NINE" (or better.) HI!HI!

Then a Real Nice Touch will be to donate it to some "indigenous"
ham when you return to The Land Of The Round DoorKnobs.

73
Jonesy
--
| Marvin L Jones | jonz | W3DHJ | linux
| Gunnison, Colorado | @ | Jonesy | OS/2 __
| 7,703' -- 2,345m | config.com | DM68mn SK
  #5   Report Post  
Old September 21st 04, 02:35 AM
Allodoxaphobia
 
Posts: n/a
Default

On Tue, 21 Sep 2004 00:55:52 GMT, asdf hath writ:
John Walton wrote:

Looking for a recommendation for a rig for a Peace Corps Volunteer --
hot, humid environment full of critters.



Might want to check with the Peace Corps about it. Back when I was in,
(Dem. Repub. of Congo, 1970-71) they were sensitive about looking like
spies (we were frequently accused of being CIA agents, radio or no) that
they really discouraged ham radio operations. That didn't stop me and
another PCV from operating a missionary's station (9Q5MO, IIRC), a big Swan
rig. It was kinda fun being on the other end of a pile-up.

I would think something like a 706 would be a decent choice. Just make sure
it's legal where you're headed. Make sure you're properly licensed, too.

Where you headed?


Maybe the IC-703 would be a choice (over the IC-706.) Easier on
whatever batteries or portable power you'll be using -- probably
more forgiving on antenna mis-match -- and, you'll be Sexy DX, so
the lower power won't be a Big Factor. The other folks will bust
their guts to work you (and, you'll find your signal reports will
_always_ be "FIVE NINE" (or better.) HI!HI!

Then a Real Nice Touch will be to donate it to some "indigenous"
ham when you return to The Land Of The Round DoorKnobs.

73
Jonesy
--
| Marvin L Jones | jonz | W3DHJ | linux
| Gunnison, Colorado | @ | Jonesy | OS/2 __
| 7,703' -- 2,345m | config.com | DM68mn SK


  #6   Report Post  
Old September 21st 04, 02:35 AM
Allodoxaphobia
 
Posts: n/a
Default

On Tue, 21 Sep 2004 00:55:52 GMT, asdf hath writ:
John Walton wrote:

Looking for a recommendation for a rig for a Peace Corps Volunteer --
hot, humid environment full of critters.



Might want to check with the Peace Corps about it. Back when I was in,
(Dem. Repub. of Congo, 1970-71) they were sensitive about looking like
spies (we were frequently accused of being CIA agents, radio or no) that
they really discouraged ham radio operations. That didn't stop me and
another PCV from operating a missionary's station (9Q5MO, IIRC), a big Swan
rig. It was kinda fun being on the other end of a pile-up.

I would think something like a 706 would be a decent choice. Just make sure
it's legal where you're headed. Make sure you're properly licensed, too.

Where you headed?


Maybe the IC-703 would be a choice (over the IC-706.) Easier on
whatever batteries or portable power you'll be using -- probably
more forgiving on antenna mis-match -- and, you'll be Sexy DX, so
the lower power won't be a Big Factor. The other folks will bust
their guts to work you (and, you'll find your signal reports will
_always_ be "FIVE NINE" (or better.) HI!HI!

Then a Real Nice Touch will be to donate it to some "indigenous"
ham when you return to The Land Of The Round DoorKnobs.

73
Jonesy
--
| Marvin L Jones | jonz | W3DHJ | linux
| Gunnison, Colorado | @ | Jonesy | OS/2 __
| 7,703' -- 2,345m | config.com | DM68mn SK
  #7   Report Post  
Old September 21st 04, 03:59 AM
John Walton
 
Posts: n/a
Default

It's not for me, I have all vintage Halli-scratchers -- but one of the
recent college grads who will be going to somewhere in Africa doing
agricultural/arbiculture work. He's not a ham yet, but I talked to him and
he wants to be "hammitized".

JW

"John Walton" wrote in message
...
Looking for a recommendation for a rig for a Peace Corps Volunteer -- hot,
humid environment full of critters.




  #8   Report Post  
Old September 21st 04, 08:54 PM
Ken Taylor
 
Posts: n/a
Default

Get him to talk to his P.C. coordinator, there are plenty of ex-PC's who are
hams and they'll know the ropes for wherever he's going. It also depends on
whether there's mains power available. When I was in Tuvalu, both I (an
Aussie contractor) and one of the PC guys had Yaesu FT-747GX's. They put up
with the indignities of the climate (much as you described in the OP, but
add coral dust) without missing a beat for three years.

Cheers.

Ken

"John Walton" wrote in message
...
It's not for me, I have all vintage Halli-scratchers -- but one of the
recent college grads who will be going to somewhere in Africa doing
agricultural/arbiculture work. He's not a ham yet, but I talked to him

and
he wants to be "hammitized".

JW

"John Walton" wrote in message
...
Looking for a recommendation for a rig for a Peace Corps Volunteer --

hot,
humid environment full of critters.






  #9   Report Post  
Old September 21st 04, 08:54 PM
Ken Taylor
 
Posts: n/a
Default

Get him to talk to his P.C. coordinator, there are plenty of ex-PC's who are
hams and they'll know the ropes for wherever he's going. It also depends on
whether there's mains power available. When I was in Tuvalu, both I (an
Aussie contractor) and one of the PC guys had Yaesu FT-747GX's. They put up
with the indignities of the climate (much as you described in the OP, but
add coral dust) without missing a beat for three years.

Cheers.

Ken

"John Walton" wrote in message
...
It's not for me, I have all vintage Halli-scratchers -- but one of the
recent college grads who will be going to somewhere in Africa doing
agricultural/arbiculture work. He's not a ham yet, but I talked to him

and
he wants to be "hammitized".

JW

"John Walton" wrote in message
...
Looking for a recommendation for a rig for a Peace Corps Volunteer --

hot,
humid environment full of critters.






  #10   Report Post  
Old September 21st 04, 08:54 PM
Ken Taylor
 
Posts: n/a
Default

Get him to talk to his P.C. coordinator, there are plenty of ex-PC's who are
hams and they'll know the ropes for wherever he's going. It also depends on
whether there's mains power available. When I was in Tuvalu, both I (an
Aussie contractor) and one of the PC guys had Yaesu FT-747GX's. They put up
with the indignities of the climate (much as you described in the OP, but
add coral dust) without missing a beat for three years.

Cheers.

Ken

"John Walton" wrote in message
...
It's not for me, I have all vintage Halli-scratchers -- but one of the
recent college grads who will be going to somewhere in Africa doing
agricultural/arbiculture work. He's not a ham yet, but I talked to him

and
he wants to be "hammitized".

JW

"John Walton" wrote in message
...
Looking for a recommendation for a rig for a Peace Corps Volunteer --

hot,
humid environment full of critters.








Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FA Signal Corps RA-74-C Tube Power Supply Military Randylands Boatanchors 0 September 28th 04 09:59 PM
FA: $9.99 AIRFORCE SIGNAL CORPS AN/USM-32 Oscilloscope, TUBE-TYPE RLucch2098 Equipment 0 July 13th 04 02:38 PM
FA: $9.99 AIRFORCE SIGNAL CORPS AN/USM-32 Oscilloscope, TUBE-TYPE RLucch2098 Equipment 0 July 13th 04 02:38 PM
FA: WWII SIGNAL CORPS FIELD STRENGTH METER, model I-95-A Ron N8LMT Boatanchors 0 May 30th 04 05:26 AM
FA: Spark Gap Xmtr Signal Corps 1918 aa8wl Boatanchors 0 March 22nd 04 06:20 PM


All times are GMT +1. The time now is 10:35 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017