Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old November 26th 04, 01:22 AM
Stephen G. Gulyas
 
Posts: n/a
Default FS: sma-to-bnc custom fit rubber covered antenna adapter

Do you have a need for a high-quality SMA-to-BNC rubber covered
factory look antenna adapter that is custom made to fit and protect
your H.T. or scanner radio?

Adapter allows you to:
Quickly change antennas to base, mobile or different style use.
Use the more popular and wider selection available of BNC antennas.
Prevent chassis connector wear or from coming loose due to antenna
changes.

Adapter features:
Gold plated contacts with a teflon insulator.
A low profile design with a rubber covering for a factory antenna
look.
The rubber base seals to the top of the radio with no spacers needed
for moisture and dirt protection.
The base also provides an excellent support for any length of antenna
or application.
No need to remove adapter once installed to make a quick and safe
BNC style antenna change.

Sizes to fit radio models:
Yaesu: VX-5R, VX-7R, VX-2R, VX-1R, FT-50-R, FT-60-R, VX-10, VX-150,
VX-110, VXA-100, VXA-120, VX-800, VXA-700
Icom: IC-T90A, IC-R5, IC-R2, IC-T8A, IC-T81A, IC-Q7A, IC-M1V
Kenwood: TH-D7, TH-G71, TH-F6A, TH-59, TH-K2AT
Alinco: DJ-V5, DJ-X3, DJ-S40
Midland : G-11
Maycom : AR108
Standard: C508A, C510, HX-460S
Uniden : Atlantis(marine)
Tate Orca : Excel
Radio Shack: HTX-200, HTX-400, HTX-245, HTX-420

Previewed in the May 2000 Issue of CQ Magazine, and the Nov. 2000
Issue of QST Magazine.

$11.95 ea. + $1.50 S+H(One to unlimited)
(Check or money order only in U.S.Funds)
(Specify-radio-model)

STEPHEN G.GULYAS
706 LALOR ST.
TRENTON, N.J. 08610
U.S.A.

A photo of the adapter is available upon request.

I welcome any questions or comments at my email:


Thanks for looking at my posting.
S.G.G. KC2BHO 73's
  #2   Report Post  
Old November 26th 04, 05:24 AM
Brian
 
Posts: n/a
Default

samw thing without rubber 3.75 at any electroncs store

what a rip off


On 25 Nov 2004 16:22:40 -0800, (Stephen G.
Gulyas) wrote:

Do you have a need for a high-quality SMA-to-BNC rubber covered
factory look antenna adapter that is custom made to fit and protect
your H.T. or scanner radio?

Adapter allows you to:
Quickly change antennas to base, mobile or different style use.
Use the more popular and wider selection available of BNC antennas.
Prevent chassis connector wear or from coming loose due to antenna
changes.

Adapter features:
Gold plated contacts with a teflon insulator.
A low profile design with a rubber covering for a factory antenna
look.
The rubber base seals to the top of the radio with no spacers needed
for moisture and dirt protection.
The base also provides an excellent support for any length of antenna
or application.
No need to remove adapter once installed to make a quick and safe
BNC style antenna change.

Sizes to fit radio models:
Yaesu: VX-5R, VX-7R, VX-2R, VX-1R, FT-50-R, FT-60-R, VX-10, VX-150,
VX-110, VXA-100, VXA-120, VX-800, VXA-700
Icom: IC-T90A, IC-R5, IC-R2, IC-T8A, IC-T81A, IC-Q7A, IC-M1V
Kenwood: TH-D7, TH-G71, TH-F6A, TH-59, TH-K2AT
Alinco: DJ-V5, DJ-X3, DJ-S40
Midland : G-11
Maycom : AR108
Standard: C508A, C510, HX-460S
Uniden : Atlantis(marine)
Tate Orca : Excel
Radio Shack: HTX-200, HTX-400, HTX-245, HTX-420

Previewed in the May 2000 Issue of CQ Magazine, and the Nov. 2000
Issue of QST Magazine.

$11.95 ea. + $1.50 S+H(One to unlimited)
(Check or money order only in U.S.Funds)
(Specify-radio-model)

STEPHEN G.GULYAS
706 LALOR ST.
TRENTON, N.J. 08610
U.S.A.

A photo of the adapter is available upon request.

I welcome any questions or comments at my email:


Thanks for looking at my posting.
S.G.G. KC2BHO 73's


  #3   Report Post  
Old November 26th 04, 05:24 AM
Brian
 
Posts: n/a
Default

samw thing without rubber 3.75 at any electroncs store

what a rip off


On 25 Nov 2004 16:22:40 -0800, (Stephen G.
Gulyas) wrote:

Do you have a need for a high-quality SMA-to-BNC rubber covered
factory look antenna adapter that is custom made to fit and protect
your H.T. or scanner radio?

Adapter allows you to:
Quickly change antennas to base, mobile or different style use.
Use the more popular and wider selection available of BNC antennas.
Prevent chassis connector wear or from coming loose due to antenna
changes.

Adapter features:
Gold plated contacts with a teflon insulator.
A low profile design with a rubber covering for a factory antenna
look.
The rubber base seals to the top of the radio with no spacers needed
for moisture and dirt protection.
The base also provides an excellent support for any length of antenna
or application.
No need to remove adapter once installed to make a quick and safe
BNC style antenna change.

Sizes to fit radio models:
Yaesu: VX-5R, VX-7R, VX-2R, VX-1R, FT-50-R, FT-60-R, VX-10, VX-150,
VX-110, VXA-100, VXA-120, VX-800, VXA-700
Icom: IC-T90A, IC-R5, IC-R2, IC-T8A, IC-T81A, IC-Q7A, IC-M1V
Kenwood: TH-D7, TH-G71, TH-F6A, TH-59, TH-K2AT
Alinco: DJ-V5, DJ-X3, DJ-S40
Midland : G-11
Maycom : AR108
Standard: C508A, C510, HX-460S
Uniden : Atlantis(marine)
Tate Orca : Excel
Radio Shack: HTX-200, HTX-400, HTX-245, HTX-420

Previewed in the May 2000 Issue of CQ Magazine, and the Nov. 2000
Issue of QST Magazine.

$11.95 ea. + $1.50 S+H(One to unlimited)
(Check or money order only in U.S.Funds)
(Specify-radio-model)

STEPHEN G.GULYAS
706 LALOR ST.
TRENTON, N.J. 08610
U.S.A.

A photo of the adapter is available upon request.

I welcome any questions or comments at my email:


Thanks for looking at my posting.
S.G.G. KC2BHO 73's


  #4   Report Post  
Old November 26th 04, 05:24 AM
Brian
 
Posts: n/a
Default

samw thing without rubber 3.75 at any electroncs store

what a rip off


On 25 Nov 2004 16:22:40 -0800, (Stephen G.
Gulyas) wrote:

Do you have a need for a high-quality SMA-to-BNC rubber covered
factory look antenna adapter that is custom made to fit and protect
your H.T. or scanner radio?

Adapter allows you to:
Quickly change antennas to base, mobile or different style use.
Use the more popular and wider selection available of BNC antennas.
Prevent chassis connector wear or from coming loose due to antenna
changes.

Adapter features:
Gold plated contacts with a teflon insulator.
A low profile design with a rubber covering for a factory antenna
look.
The rubber base seals to the top of the radio with no spacers needed
for moisture and dirt protection.
The base also provides an excellent support for any length of antenna
or application.
No need to remove adapter once installed to make a quick and safe
BNC style antenna change.

Sizes to fit radio models:
Yaesu: VX-5R, VX-7R, VX-2R, VX-1R, FT-50-R, FT-60-R, VX-10, VX-150,
VX-110, VXA-100, VXA-120, VX-800, VXA-700
Icom: IC-T90A, IC-R5, IC-R2, IC-T8A, IC-T81A, IC-Q7A, IC-M1V
Kenwood: TH-D7, TH-G71, TH-F6A, TH-59, TH-K2AT
Alinco: DJ-V5, DJ-X3, DJ-S40
Midland : G-11
Maycom : AR108
Standard: C508A, C510, HX-460S
Uniden : Atlantis(marine)
Tate Orca : Excel
Radio Shack: HTX-200, HTX-400, HTX-245, HTX-420

Previewed in the May 2000 Issue of CQ Magazine, and the Nov. 2000
Issue of QST Magazine.

$11.95 ea. + $1.50 S+H(One to unlimited)
(Check or money order only in U.S.Funds)
(Specify-radio-model)

STEPHEN G.GULYAS
706 LALOR ST.
TRENTON, N.J. 08610
U.S.A.

A photo of the adapter is available upon request.

I welcome any questions or comments at my email:


Thanks for looking at my posting.
S.G.G. KC2BHO 73's


  #5   Report Post  
Old November 26th 04, 06:00 AM
Ed
 
Posts: n/a
Default



samw thing without rubber 3.75 at any electroncs store

what a rip off



but you know you can get in serious trouble without your rubbers . . .







Ed


  #6   Report Post  
Old November 26th 04, 06:00 AM
Ed
 
Posts: n/a
Default



samw thing without rubber 3.75 at any electroncs store

what a rip off



but you know you can get in serious trouble without your rubbers . . .







Ed
  #7   Report Post  
Old November 26th 04, 06:00 AM
Ed
 
Posts: n/a
Default



samw thing without rubber 3.75 at any electroncs store

what a rip off



but you know you can get in serious trouble without your rubbers . . .







Ed
  #8   Report Post  
Old November 28th 04, 08:24 PM
John P Vassel
 
Posts: n/a
Default

Brian wrote in
:

samw thing without rubber 3.75 at any electroncs store

what a rip off


And without the rubber, the flex and bending of the antenna gets directly
transferred to the sma connector. You'll be wishing you'd had some sort of
support before long, as the rig is in the shop with a broken sma connector.
Stephens connectors work well, I've had one for years, and think it was one
of the smarter accessories I've purchased. (Ft-50)


john
  #9   Report Post  
Old November 28th 04, 08:24 PM
John P Vassel
 
Posts: n/a
Default

Brian wrote in
:

samw thing without rubber 3.75 at any electroncs store

what a rip off


And without the rubber, the flex and bending of the antenna gets directly
transferred to the sma connector. You'll be wishing you'd had some sort of
support before long, as the rig is in the shop with a broken sma connector.
Stephens connectors work well, I've had one for years, and think it was one
of the smarter accessories I've purchased. (Ft-50)


john
  #10   Report Post  
Old November 28th 04, 08:24 PM
John P Vassel
 
Posts: n/a
Default

Brian wrote in
:

samw thing without rubber 3.75 at any electroncs store

what a rip off


And without the rubber, the flex and bending of the antenna gets directly
transferred to the sma connector. You'll be wishing you'd had some sort of
support before long, as the rig is in the shop with a broken sma connector.
Stephens connectors work well, I've had one for years, and think it was one
of the smarter accessories I've purchased. (Ft-50)


john
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 11:22 PM
FS: sma-to-bnc custom fit rubber covered antenna adapter Stephen G. Gulyas Antenna 20 December 8th 04 06:35 AM
Yaesu FT-857D questions Joe S. Equipment 6 October 25th 04 09:40 AM
Mobile Ant L match ? Henry Kolesnik Antenna 14 January 20th 04 05:08 AM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 04:01 PM


All times are GMT +1. The time now is 01:00 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017