On 3/17/2014 3:45 AM, Jeff wrote:

7dBm is an absolutely colossal signal for a TV set. Even 0dBm is an
absolutely colossal signal!

Not in the United States. It was the minimum that the cable industry
provides to the TV set.

We are talking a signal 4.25Mhz wide signal, not SSB or CW.


dBm is not a bandwidth dependant measurement such as CNR which is.
Putting +7dBm into a tv receiver is madness, it would cause severe
overload and inter mods. +7dBm is 50mW and that equates to about 61mV in
a 75 ohm system which is an enormous signal.

Jeff

Wrong. TV's are made to handle at least 20 dbm. And cable tv companies
must deliver at least 10 dbm to the premises.

TV signals (at least in the U.S.) are not measured by CNR - they are
measured by dbm. CNR is not important because the bandwidth does not
change.

Your insistence on using CNR shows you know nothing about how the
industry measures signal strength.

--
==================
Remove the "x" from my email address
Jerry, AI0K

==================