| Home |
| Search |
| Today's Posts |
|
|
|
#1
February 9th 05, 06:45 PM
|
|||
|
|||
ICOM 756 Programming?
Is there any Windows software available for programming the
Icom 756 Pro2/3 thru the CV-I port? RT Systems says they're not offering anything and has no future plans. 73 Don K6LTS email in QRZ.com |
|
#2
February 12th 05, 02:06 PM
|
|||
|
|||
|
the only thing i have found is TRX manager and it will only allow you to
program the memories the rigs running under CIV where never intended to be computer programmed like the VHF/UHF rigs that use a programming cable such as the IC2100 or V8000 where you can set the TX freq Rx freq PL tone and such TRX Manager isnt nearly that slick good luck wrote: Is there any Windows software available for programming the Icom 756 Pro2/3 thru the CV-I port? RT Systems says they're not offering anything and has no future plans. 73 Don K6LTS email in QRZ.com |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Useful Icom IC-R75 [R-75] Links for Facts and Information about the Icom IC-R75 [R-75] | Shortwave | |||
| Icom IC-R20 Programming Comments | Scanner | |||
| Last Day For Secret Icom Sale R-75 $425 | Shortwave | |||
| Icom E90/T90A programming software. | Equipment | |||
| Icom E90/T90A programming software. | Equipment | |||
Hybrid Mode
