Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Yaesu Vx-7R firmware problem???
Hi,
As anybody else seen these problems with the Vx-7R handheld I have entered a number of frequencies I wish to scan. I have setup PMS to scan these frequencies. The problem is, each time the rig completes a scan and returns back to the start it emits a beep. I can't seem to turn the beep off and enter "a silent scan mode". It's only scanning about 10 frequencies so beeps every few seconds. I have tried all the setting to enable/disable scans beeps, none work. The other problem is entering "Special Memory" mode. With I press [F] then SPCL key 9, then rotate the dial to select "2 MR Group" then press PTT to confirm, I get an error beep. I cant select OTM or HYP mode as well. I have found I need to select Broadcast or Marine before it works. If I then re-enter "Special Memory" mode and then select "2 MR Group" or any other mode it then works. Very odd!!. Thanks John G4KUC |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Announcing the 'new' Yaesu FRG-7700 Receiver Users eGroup on YAHOO ! | Shortwave | |||
Yaesu FT-50RD Transmit Problem | Equipment | |||
Fox Tango International, Yaesu Users Groups | Antenna | |||
Comparision: Grundig 400 vs. Yaesu FRG-100 | Shortwave | |||
Yaesu | Swap |