Need Mike and Cable for Azden PCS3000
 

This is kinda weird cable that has a 16 receptacle plug on the
coil cord to the mike. If any one has one ofthese I would like
to buy it.
Joe Fenn )


************************************************** ********
* Ham KH6JF AARS/MARS ABM6JF QCWA WW2 VET WD RADIO SYSTEM*
* Army MARS PRECEDED by AARS (Army Amateur Radio System) *
* Hi State ARMY MARS COORDINATOR *
************************************************** ********

Need Mike and Cable for Azden PCS3000
 

Hi Joe:

The PCS-3000 uses a 12 pin connector on the radio end. Make sure
you find the right one. I have a "like new" 3000 which will be going
on Ebay shortly. I would sell you just the mic, but it kind of makes
the
rest of the radio useless, hi hi!

Tedd, VE3TJD

Need Mike and Cable for Azden PCS3000
 

Tedd,
Your right, it is a 12 pin female plug. I guess at 85 I have
trouble seeing or counting. The recptacles are so old they
have lost all their springiness. I tried deoxit on em and they
would work for a while, then I'd try to pinch them back together
and again within weeks one or several would'nt make good contacts.
And I dont think there is a 12 pin mike plug available this side
of heaven. Good luck on your sale I am sure someone will get a
good deal from you.
Joe


************************************************** ********
* Ham KH6JF AARS/MARS ABM6JF QCWA WW2 VET WD RADIO SYSTEM*
* Army MARS PRECEDED by AARS (Army Amateur Radio System) *
* Hi State ARMY MARS COORDINATOR *
************************************************** ********

Need Mike and Cable for Azden PCS3000
 

Do you know where I can get a tone encoder for the PCS 3000?? Thanks
"Joseph Fenn" wrote in message
va.net...
Tedd,
Your right, it is a 12 pin female plug. I guess at 85 I have
trouble seeing or counting. The recptacles are so old they
have lost all their springiness. I tried deoxit on em and they
would work for a while, then I'd try to pinch them back together
and again within weeks one or several would'nt make good contacts.
And I dont think there is a 12 pin mike plug available this side
of heaven. Good luck on your sale I am sure someone will get a
good deal from you.
Joe


************************************************** ********
* Ham KH6JF AARS/MARS ABM6JF QCWA WW2 VET WD RADIO SYSTEM*
* Army MARS PRECEDED by AARS (Army Amateur Radio System) * * Hi
State ARMY MARS COORDINATOR *
************************************************** ********

Need Mike and Cable for Azden PCS3000
 

On Sun, 30 Apr 2006, Bill wrote:

Do you know where I can get a tone encoder for the PCS 3000?? Thanks
"Joseph Fenn" wrote in message
va.net...
Tedd,
Your right, it is a 12 pin female plug. I guess at 85 I have
trouble seeing or counting. The recptacles are so old they
have lost all their springiness. I tried deoxit on em and they
would work for a while, then I'd try to pinch them back together
and again within weeks one or several would'nt make good contacts.
And I dont think there is a 12 pin mike plug available this side
of heaven. Good luck on your sale I am sure someone will get a
good deal from you.
Joe

Am I answering to myself!!!! No I dont know where you can get
a tone pad nor a mike cable. I am still looking for a new
mike cable also as the AZDEN is just sitting there idle now for
almost a year.
Joe