Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old July 17th 06, 06:47 AM posted to rec.radio.amateur.equipment
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 2
Default Can someone explain DX Ducting?

I hope this is the correct newsgroup for this question.
Can someone explain DX Ducting?
I believe thats the correct word.

I live in a rural area, and my nearest tv stations are about 50 miles
away. Those 3 stations normally come in pretty good. (one VHF, two
UHF) I have a 7 element antenna pointed approx. north (toward that
city). The other closer stations are to the south, and are 65 and 90
miles away. They dont come in as good, but are usually viewable.
Turning the antenna South helps those, but I have to do it manually
until I get a new rotor. (old one died).

For some reason, starting on Saturday, I have been getting tv stations
from up to 275 miles away, yet I can not get any of these "local"
stations at all. What's really weird, is that the stations I am
getting are all to the East of me. In other words, they are broadside
to the antenna. I have never heard of getting a signal on the
broadside.....

Just for grins, I called the 800 number of one of these distant
stations, and they were happy to hear they were transmitting about 250
miles. They said the reason is called ductingm and said it's caused
by the atmosphere and weather conditions.

OK, I can undestand this (sort of). I do recall back in the 70's when
I had a CB radio in my car, and getting "Skip". But this TV things is
different, becasue a tv antenna is directional, unlike a CB antenna
that tends to transmit in all directions.

I looked up "Ducting" on the web. Most were about heating ducts, but
did find one link which was way over my head. I'd have to be an
engineer to understand it.

In simple terms, could someone please explain this. Particularly why
I can not get the "local" stations, and how can I get very distant
signals on the broadside of my antenna?

Thanks

Mark
  #2   Report Post  
Old July 17th 06, 11:13 AM posted to rec.radio.amateur.equipment
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 618
Default Can someone explain DX Ducting?


wrote in message
...
I hope this is the correct newsgroup for this question.
Can someone explain DX Ducting?
I believe thats the correct word.

I live in a rural area, and my nearest tv stations are about 50 miles
away. Those 3 stations normally come in pretty good. (one VHF, two
UHF) I have a 7 element antenna pointed approx. north (toward that
city). The other closer stations are to the south, and are 65 and 90
miles away. They dont come in as good, but are usually viewable.
Turning the antenna South helps those, but I have to do it manually
until I get a new rotor. (old one died).

For some reason, starting on Saturday, I have been getting tv stations
from up to 275 miles away, yet I can not get any of these "local"
stations at all. What's really weird, is that the stations I am
getting are all to the East of me. In other words, they are broadside
to the antenna. I have never heard of getting a signal on the
broadside.....

Just for grins, I called the 800 number of one of these distant
stations, and they were happy to hear they were transmitting about 250
miles. They said the reason is called ductingm and said it's caused
by the atmosphere and weather conditions.

OK, I can undestand this (sort of). I do recall back in the 70's when
I had a CB radio in my car, and getting "Skip". But this TV things is
different, becasue a tv antenna is directional, unlike a CB antenna
that tends to transmit in all directions.

I looked up "Ducting" on the web. Most were about heating ducts, but
did find one link which was way over my head. I'd have to be an
engineer to understand it.

In simple terms, could someone please explain this. Particularly why
I can not get the "local" stations, and how can I get very distant
signals on the broadside of my antenna?


Although beams are directional antennas, they can and do pick up broadside
to the beam. They normally just don't pick up as well. Beams have a
pattern that has the strongest pickup to the front, a smaller pickup from
the back, and very weak pickup from the sides. If the signal is strong
enough, you will be able to receive a signal off the side of the beam.


  #3   Report Post  
Old July 17th 06, 08:28 PM posted to rec.radio.amateur.equipment
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 2
Default Can someone explain DX Ducting?

On Mon, 17 Jul 2006 06:13:15 -0400, "Dee Flint"
wrote:


wrote in message
.. .
I hope this is the correct newsgroup for this question.
Can someone explain DX Ducting?
I believe thats the correct word.

I live in a rural area, and my nearest tv stations are about 50 miles
away. Those 3 stations normally come in pretty good. (one VHF, two
UHF) I have a 7 element antenna pointed approx. north (toward that
city). The other closer stations are to the south, and are 65 and 90
miles away. They dont come in as good, but are usually viewable.
Turning the antenna South helps those, but I have to do it manually
until I get a new rotor. (old one died).

For some reason, starting on Saturday, I have been getting tv stations
from up to 275 miles away, yet I can not get any of these "local"
stations at all. What's really weird, is that the stations I am
getting are all to the East of me. In other words, they are broadside
to the antenna. I have never heard of getting a signal on the
broadside.....

Just for grins, I called the 800 number of one of these distant
stations, and they were happy to hear they were transmitting about 250
miles. They said the reason is called ductingm and said it's caused
by the atmosphere and weather conditions.

OK, I can undestand this (sort of). I do recall back in the 70's when
I had a CB radio in my car, and getting "Skip". But this TV things is
different, becasue a tv antenna is directional, unlike a CB antenna
that tends to transmit in all directions.

I looked up "Ducting" on the web. Most were about heating ducts, but
did find one link which was way over my head. I'd have to be an
engineer to understand it.

In simple terms, could someone please explain this. Particularly why
I can not get the "local" stations, and how can I get very distant
signals on the broadside of my antenna?


Although beams are directional antennas, they can and do pick up broadside
to the beam. They normally just don't pick up as well. Beams have a
pattern that has the strongest pickup to the front, a smaller pickup from
the back, and very weak pickup from the sides. If the signal is strong
enough, you will be able to receive a signal off the side of the beam.



Thanks to both of you for the reply. I wanted to try to turn the
antenna toward those stations, because if they came in that good on
the side of the antenna, they would have been crystal clear. We are
having a severe heat spell. temps around of over 100deg.F That must
have something to do with it. But it was too hot to climb on the roof

Mark.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
when will stevie explain his lie [email protected] Policy 0 December 8th 05 07:54 AM
Explain Balun Jennie Antenna 3 September 30th 05 10:42 PM
Old Timer is a Newb again! Explain Trunking and Digital PLEASE! Katmandu Scanner 1 December 1st 04 12:08 AM
Please explain the difference Warpcore Shortwave 8 August 6th 03 04:57 AM


All times are GMT +1. The time now is 12:38 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017