I opened the front panel of the radio to look for the back light which
stopped working.
There seems to be a factory mod, a thin green wire running from the output
of Q3003 5v regulator under the top cover to a place behind the front panel.

This green wire has broken off from the position where it was soldered
behind the front panel and I can not find where it is supposed to go. The
radio will not transmit with this wire disconnected.

PLEASE, can any of you with this radio take a look and see where this wire
is supposed to be soldered to?

Thanks

Joel
ZS6CBA

Hey Joel

I did a search for you, and the only thing that turned up is this
message!

I posted the question on the SARL website as requested, and hold
thumbs.

73
Eric
ZS6BUJ

Joel Dorfan wrote:

I opened the front panel of the radio to look for the back light which
stopped working.
There seems to be a factory mod, a thin green wire running from the output
of Q3003 5v regulator under the top cover to a place behind the front panel.

This green wire has broken off from the position where it was soldered
behind the front panel and I can not find where it is supposed to go. The
radio will not transmit with this wire disconnected.

PLEASE, can any of you with this radio take a look and see where this wire
is supposed to be soldered to?

Thanks

Joel
ZS6CBA