This is directed at those who own or use the IFR FM/AM 1600S
series service monitor.

I've just become the proud owner of one. I've figured out many
functions just by futzing with the menus. However, one thing still
eludes me.

How in the Multiverse do you set the thing up to transmit a
DPL/DCS code or PL tone along with the standard 1KHz test tone?

Thanks much.

--
Dr. Anton Squeegee, Director, Dutch Surrealist Plumbing Institute
(Known to some as Bruce Lane, KC7GR)
kyrrin a/t bluefeathertech d-o=t c&o&m
"Quando Omni Flunkus Moritati" (Red Green)

How in the Multiverse do you set the thing up to transmit a
DPL/DCS code or PL tone along with the standard 1KHz test tone?

Thanks much.

In old models (1200-1500) you must go: Program-2-nd-option number, and then
setup tone codes. To execute option ,(in gen. mode): execute-2-nd-option
number !

Maybe this will help you on this model ???

How in the Multiverse do you set the thing up to transmit a
DPL/DCS code or PL tone along with the standard 1KHz test tone?

Thanks much.

In old models (1200-1500) you must go: Program-2-nd-option number, and then
setup tone codes. To execute option ,(in gen. mode): execute-2-nd-option
number !

Maybe this will help you on this model ???

In article , Lex-Lutor says...

How in the Multiverse do you set the thing up to transmit a
DPL/DCS code or PL tone along with the standard 1KHz test tone?

Thanks much.

In old models (1200-1500) you must go: Program-2-nd-option number, and then
setup tone codes. To execute option ,(in gen. mode): execute-2-nd-option
number !

Maybe this will help you on this model ???

Completely different in the 1600's, but thanks for responding in
any case. ;-)


--
Dr. Anton Squeegee, Director, Dutch Surrealist Plumbing Institute
(Known to some as Bruce Lane, KC7GR)
kyrrin a/t bluefeathertech d-o=t c&o&m
"Quando Omni Flunkus Moritati" (Red Green)

In article , Lex-Lutor says...

How in the Multiverse do you set the thing up to transmit a
DPL/DCS code or PL tone along with the standard 1KHz test tone?

Thanks much.

In old models (1200-1500) you must go: Program-2-nd-option number, and then
setup tone codes. To execute option ,(in gen. mode): execute-2-nd-option
number !

Maybe this will help you on this model ???

Completely different in the 1600's, but thanks for responding in
any case. ;-)


--
Dr. Anton Squeegee, Director, Dutch Surrealist Plumbing Institute
(Known to some as Bruce Lane, KC7GR)
kyrrin a/t bluefeathertech d-o=t c&o&m
"Quando Omni Flunkus Moritati" (Red Green)