| Home |
| Search |
| Today's Posts |
|
#1
December 25th 03, 12:32 AM
|
|||
|
|||
Best Ways to *Waterproof* Coax Connections
John Soto wrote:
I'm planning to run 6 RG11 feeds for my DishTV setup. What is the best way of making sure the connections are *waterproof* indefinately. I'm using T&B SNS connectors on the cable and where the connection meets the LNB, I'm thinking about using some sorta of silicone grease sealant on the threds, plenty of wrapping with Scotch 88 tape and then a coat of Skotchcoat. Product called "Coax-Seal". Non-hardening black putty. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
| Coax antenna for aircraft, help. | Antenna | |||
| Dead Serious T2FD: HV Insulation, EMP Arrestors, extra Coax Choke? | Antenna | |||
| Best Ways to *Waterproof* Coax Connections | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
Threaded Mode
