our radio club has 2 motorola maxtrac radios that we want to put in
the 900mhz ham band.
we can't find the right software to do this can some one help.

Thank you
N3OW

Might check with your local two way radio service shops. Think Motorola
only licenses the software to authorized repair shops. The shop would
program the radio, so there will be a service charge. Also the radio
may not reach the amateur section of 900 MHz. Check before if the radio
can be put on the frequency you want.

JJJHS

wrote:
our radio club has 2 motorola maxtrac radios that we want to put in
the 900mhz ham band.
we can't find the right software to do this can some one help.

Thank you
N3OW

In article ,
says...

our radio club has 2 motorola maxtrac radios that we want to put in
the 900mhz ham band.
we can't find the right software to do this can some one help.

I can perform this conversion (something I forgot to mention in my
previous post in the other newsgroup) for you. Probably run about $60
labor plus parts.

You need a lot more than just the Maxtrac software (still
available for about $200 or so from Motorola). See my previous reply.


--
Dr. Anton T. Squeegee, Director, Dutch Surrealist Plumbing Institute.
(Known to some as Bruce Lane, ARS KC7GR,
kyrrin (a/t) bluefeathertech[d=o=t]calm -- www.bluefeathertech.com
"If Salvador Dali had owned a computer, would it have been equipped
with surreal ports?"