Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
In article ,
i3hev, mario held wrote: Last, but not least, a simple DCR is inherently a DSB receiver, lest you implement it with rather complex mixers - which add much to the circuit total complexity. As I understand it, in order to do SSB via direct conversion, you must use a modern version of the old IQ phasing technique. This requires doing the zero-IF mixdown twice, on two different versions of the signal (with a uniform 90-degree phase shift being applied to one copy of the RF or LO signal). The resulting two baseband outputs are then processed (with a further 90-degree phase shift being applied to one of them) and carefully mixed. This results in reinforcement of the desired sideband and suppression of the other. The circuitry needed to apply the necessary phase shifts is not trivial (if you want enough accuracy to deliver acceptable opposite-sideband rejection), and is not necessarily simpler or less expensive than the filtering and extra stage of mixing done in a traditional IF-based SSB receiver or transmitter. These days, of course, you can apply the phase shift by converting the two baseband signals to digital format, and implementing the final 90-degree phase shift via a digital FIR all-pass filter. This of course requires your design to have a pair of high-linearity ADCs, a DSP, and a DAC to reproduce the final (mixed) signal. The "holy Grail" these days seems to be a direct-from-RF system, in which the RF signal is _directly_ sampled (at a ferociously-high sampling rate), and all of the phase shifts and downconversion and mixing are done digitally. RF-grade ADCs with the necessary linearity and speed aren't particularly inexpensive, especially if you need your system to deliver a very high dynamic range which can work properly even in the presence of strong in-band or near-band interferers. -- Dave Platt AE6EO Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior I do _not_ wish to receive unsolicited commercial email, and I will boycott any company which has the gall to send me such ads! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
When does channel changing DSSS become hybrid DSSS/FHSS? | Policy | |||
Channel-based AM tube tuner (was Designs for a single frequency high performance AM-MW receiver?) | Shortwave | |||
MilAir Monitoring from KeyWest - Lots of Comms! | Scanner | |||
North-Central Florida Mil Logs 9/10/2003 & 9/11/2003 | Scanner | |||
North-Central Florida Mil Logs 9/10/2003 & 9/11/2003 | Shortwave |