| Home |
| Search |
| Today's Posts |
|
#7
|
|||
|
|||
|
ORIGINAL MESSAGE:
On 5 Nov 2006 10:26:11 -0800, "Telstar Electronics" wrote: Saturation is most ofen an undesireable effect... that causes distortion in amplifiers. ------------ REPLY FOLLOWS ------------ Saturation is only undesirable in LINEAR amplifiers. In non-linear amps which are often used for CW, RTTY or FM, saturation is good because it improves efficiency. Distortion in those applications is unimportant. Bill, W6WRT |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|