| Home |
| Search |
| Today's Posts |
|
|
|
#1
March 14th 07, 09:38 PM
posted to rec.radio.amateur.homebrew,sci.electronics.basics,sci.electronics.design
|
|||
|
|||
VCXO frequency isn't high enough
On Wed, 14 Mar 2007 04:58:52 -0500, Anthony Fremont wrote:
I guess I'm at the limits of that particular crystal. I think you are getting close to the limits :-) You might get a few Hz more by reducing the value of the 2 100pF capacitors. Try another crystal or a ceramic resonator. 73, Ed. EI9GQ. -- Linux 2.6.18 Remove 'X' to reply by E-Mail |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| High Frequency Propagation Models | Shortwave | |||
| Get High | Shortwave | |||
| Production of High frequency Crystals. | Homebrew | |||
| Channel-based AM tube tuner (was Designs for a single frequency high performance AM-MW receiver?) | Shortwave | |||
| Wanted- Used Motorola UHF JT1000 High Split (470-520mhz), & a used Syntor X-9000 UHF High-Split | Swap | |||
Hybrid Mode
