| Home |
| Search |
| Today's Posts |
|
#37
March 16th 07, 11:01 PM
posted to rec.radio.amateur.homebrew,sci.electronics.basics,sci.electronics.design
|
|||
|
|||
VCXO frequency isn't high enough
On Mar 13, 10:02 am, "Anthony Fremont" wrote:
Hello all, ... supposed to pull the colorburst crystal high in frequency then the adjustable cap should be able to tweak it back down. It's only possible to pull a crystal a little way from its center frequency by external components. If you put a resistor in parallel with the crystal (to lower its Q) you can increase the pull range. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| High Frequency Propagation Models | Shortwave | |||
| Get High | Shortwave | |||
| Production of High frequency Crystals. | Homebrew | |||
| Channel-based AM tube tuner (was Designs for a single frequency high performance AM-MW receiver?) | Shortwave | |||
| Wanted- Used Motorola UHF JT1000 High Split (470-520mhz), & a used Syntor X-9000 UHF High-Split | Swap | |||
Threaded Mode
