Home |
Search |
Today's Posts |
#8
|
|||
|
|||
Self Osc Problem
On May 23, 12:23 am, Jack Schmidling wrote:
I am building an exciter for my 8000 rig. 6AG7 VFO, 6CL6 buffer and 807 final. I am plagued with the problem that resonance in the final does not agree with peak power out. The power peak (watt meter or light bulb) is a considerable twist south of the plate current dip. Looking at the output on a scope shows nothing strange about the wave shape as the amplitude increases beyond the dip. I have tried neutralizing with coupled links between the input and output tanks but it makes no difference nor does anything else I have tried. Any ideas would be welcome. Jack K9ACT -- PHOTO OF THE WEEK:http://schmidling.com/pow.htm Astronomy, Beer, Cheese, Fiber,Gems, Sausage,Silverhttp://schmidling.com Jack, am a believer in the grid dipper,double check the buffer and PA tuning ,make sure that they are on frequency and not doubling .If 807 has Pi network,make sure cap C1 nd C2 are in ball park for tuning range of each band..Handbook wll give these values...Unplug 807 and make sure the 6AG7 is on freq and on resonance.. think you hae a good choice with tube lineup.just need to get it to settle down...GL 73 Harold W4PQW |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help! Problem with 148 GTL | CB | |||
Haynie admits to problem, alzheimers victims respond with, "What problem?" | Policy | |||
Another TH-D7A(G2.0) Problem | Digital | |||
BPL might not be such a problem after all | Shortwave | |||
IC-746 PRO tx problem | Equipment |