Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() "Dante" wrote in message ... In the amplifier compartment of a 1970s vintage ham radio, if the plate choke in the B+ supply lost some of it's inductance due to some of the coil windings shorting together would it cause the plate tuning capacitor to require less capacitance (such as fully open) to reach resonance? -Curios. Just an estimate... I think the plate choke is effectively in parallel with the plate tuning inductor. But, I suspect ratios between the two inductances would preclude much interaction unless there was a major loss failure in the choke. I'd be more worried about parallel resonances in the choke falling within the operating bands the amp covers. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
If the plate choke changes value how does it affect the plate tuning capacitor? | Equipment | |||
FA- National R-175 R.F. Plate Choke | Homebrew | |||
WTD: National R175 Plate Choke | Boatanchors | |||
FS: National R175A Plate Choke | Equipment | |||
FS: National R175A Plate Choke | Homebrew |