April 1977 QST article
Hi,
Does anybody have a copy of the April 1977 QST? The article I am interested in the the one by Howard Sartori, entitled "solid tubes, a new life for old designs". If somebody could scan this article, I would be glad to pay them. Thanks! Pete KE9OA |
April 1977 QST article
Pete KE9OA wrote:
Hi, Does anybody have a copy of the April 1977 QST? ... Hi, Pete, you have mail! :) -- 73 es 51 de i3hev, op. mario Non è Radioamatore, se non gli fuma il saldatore! - Campagna 2006 "Il Radioamatore non è uno che ascolta la radio" it.hobby.radioamatori.moderato http://digilander.libero.it/hamweb http://digilander.libero.it/esperantovenezia |
April 1977 QST article
Thank you Mario.............you are the best! I have always wanted to build
solid state tube replacements. Now, I am on my way to converting my Collins R-388 to a solid state unit. Pete "i3hev, mario held" wrote in message ... Pete KE9OA wrote: Hi, Does anybody have a copy of the April 1977 QST? ... Hi, Pete, you have mail! :) -- 73 es 51 de i3hev, op. mario Non è Radioamatore, se non gli fuma il saldatore! - Campagna 2006 "Il Radioamatore non è uno che ascolta la radio" it.hobby.radioamatori.moderato http://digilander.libero.it/hamweb http://digilander.libero.it/esperantovenezia |
April 1977 QST article
Hey Pete
Send the other Pete a copy... Tio Pedro |
April 1977 QST article
Pete KE9OA Wrote:
Does anybody have a copy of the April 1977 QST? The article I am interested in the the one by Howard Sartori, entitled "solid tubes, a new life for old designs". Pete, the last time I did this, I had dual gate MosFET devices. These days they are harder to find, so I'd probably use two JFETs in cascade to get more or less the same effect. I vaguelly remember the article recommends dual gate MosFETs but I will admit, it's been a long time since I read it. Jim Pennell N6BIU -- 21:55 Pacific Time Zone Jan 14 2008 International Time 05:55 UTC 15.01.2008 |
April 1977 QST article
They just went out. What you have coming are 6 JPEGs that are 730k each.
Pete "Tio Pedro" wrote in message ... Hey Pete Send the other Pete a copy... Tio Pedro |
April 1977 QST article
I will give it a whirl. I do have some of the dual gate devices on hand. I
have to do a board layout for each of the modules, that will have a pin field that has the same pattern as the tube base. Out of all the receivers I have / have had, I think the R-388 is still my favorite. Pete "Jim" wrote in message ... Pete KE9OA Wrote: Does anybody have a copy of the April 1977 QST? The article I am interested in the the one by Howard Sartori, entitled "solid tubes, a new life for old designs". Pete, the last time I did this, I had dual gate MosFET devices. These days they are harder to find, so I'd probably use two JFETs in cascade to get more or less the same effect. I vaguelly remember the article recommends dual gate MosFETs but I will admit, it's been a long time since I read it. Jim Pennell N6BIU -- 21:55 Pacific Time Zone Jan 14 2008 International Time 05:55 UTC 15.01.2008 |
April 1977 QST article
Hi Pete, hi all!
Pete KE9OA wrote: Thank you Mario.............you are the best! well, well, now... just one among the beAsts... :) glad to be of service! I have always wanted to build solid state tube replacements. Now, I am on my way to converting my Collins R-388 to a solid state unit. A good lot of work, I'd say - good luck! :) Ciao! -- 73 es 51 de i3hev, op. mario Non è Radioamatore, se non gli fuma il saldatore! - Campagna 2006 "Il Radioamatore non è uno che ascolta la radio" it.hobby.radioamatori.moderato http://digilander.libero.it/hamweb http://digilander.libero.it/esperantovenezia |
April 1977 QST article
i3hev, mario held wrote:
Hi Pete, hi all! Pete KE9OA wrote: Thank you Mario.............you are the best! well, well, now... just one among the beAsts... :) glad to be of service! I have always wanted to build solid state tube replacements. Now, I am on my way to converting my Collins R-388 to a solid state unit. A good lot of work, I'd say - good luck! :) Ciao! I wouldn't mind seeing that article too; in the '80s I built some common type replacements using jfets and bipolars and installed them in an HP scope which was the fastest I had at that time. I still have a real Fetron in my desk drawer. Regards, Michael |
April 1977 QST article
Hi Michael,
msg wrote: I wouldn't mind seeing that article too... if your address (minus underscores) is a valid one, you have mail :) in the '80s I built some common type replacements using jfets and bipolars and installed them in an HP scope..... I think that we all may want to learn the knack: in a near future this will probably be the only way to refurbish tube equipment... :) Regards, -- 73 es 51 de i3hev, op. mario Non è Radioamatore, se non gli fuma il saldatore! - Campagna 2006 "Il Radioamatore non è uno che ascolta la radio" it.hobby.radioamatori.moderato http://digilander.libero.it/hamweb http://digilander.libero.it/esperantovenezia |
All times are GMT +1. The time now is 10:55 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com