Hello,

I build this (http://oh8jep.kotinet.com/eb104/pw_eb104.gif) power supply for
the EB104-amplifier. Unfortunately I can't get BUX22 and so I used BUX98A.

The transformer-output is a little bit lower, so the DC is 62V. But the
supply works and I get 50V output. So far so good.

My eb104 is still not assembled, so I tested the supply with two Osram
halogen lamps HLX64655 250W and 24V in series connexion.

When the lamps are connected and the transformer is connected to the
mains supply sometimes the lamps will light. The current ist ca. 11
ampere. But the current behind the rectifier is 21A!!! But the output
voltage is still 50V.

Often the lamps will not light an the voltage drops down to zero.

If I try four lamps, a series of two parallel lamps, they never light.

When the lamps are not connected and I connect the power supply to the
mains supply and after that I connect the lamps the voltage drops always
down to zero.


So you see, a lot of problems.

Any hints?


Vy 73 Holger/ DL9HDA