| Home |
| Search |
| Today's Posts |
|
#3
April 1st 08, 09:35 PM
posted to comp.arch.embedded,rec.radio.amateur.homebrew
|
|||
|
|||
Sheet-beam tubes (6ar8, 7360, etc) as analog multipliers
Tim Wescott wrote:
snip 2: There are any number of hot-rod DSP chips that'll fit into a T6-1/2 envelope, complete with ADC's, DAC's and a power supply to run off of 6.3VAC. Sealing the glass up without messing up the DSP may be a challenge, but you could always fudge and use acrylic. This would be a new acme in solid-state (Fetron-style) replacements  Michael |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 7360/6AR8 mixer configs | Homebrew | |||
| FS 7360, 5763, 6000 Tubes | Boatanchors | |||
| Frequency multipliers: Usable modulation formats? | Homebrew | |||
| tubes & frequency multipliers | Homebrew | |||
| tubes & frequency multipliers | Homebrew | |||
Threaded Mode
