Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
On Aug 17, 9:12*pm, mrhaney wrote:
I am looking for a few (10) diodes 1N270...It is a germanium and used in Double Balanced mixers in SSB generation..Most suppliers have a $25 to $50 min order and I don`t care for that.. thanks * Harold W4PQW Are you trying to reproduce something from a 60's handbook? I remember them speccing 1N270's but that's because those were the parts people had in the junkboxes back then. There is nothing at all magic about germanium here. The silicon diodes will require slightly more drive voltage to switch but that's not a big deal as you always drive them way into saturation anyway. NTE109 is the ECT/NTE number for a their medium-voltage germanium replacement, officially listed in the NTE sub book, and Mouser and maybe even your local radio/TV repairman would have some. Mouser has no minimum order. You will have much better luck using 1N914's or 1N4148's or even better a real matched DBM from Minicircuits et al. "Experimental Methods in RF Design" has a lot of good scoop on mixers that goes way beyond anything in a 60's ARRL handbook. Tim N3QE |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
DIODES 1 KV AT 1.5A | Equipment | |||
DIODES 1 KV AT 1.5A | Equipment | |||
FS:DIODES: 1KV @ 1.5A | Homebrew | |||
FS:DIODES:1KV @ 1.5A | Equipment | |||
FS:DIODES:1KV @ 1.5A | Equipment |