Hi,
I would like to use this tube for QRP purposes. Anybody out there with
schematics, plans, experience etc.?
Tnx
73
Fred

Fred wrote:
Hi,
I would like to use this tube for QRP purposes. Anybody out there with
schematics, plans, experience etc.?
Tnx
73
Fred
http://www.google.com/url?sa=t&sourc...EJccu06qj-hsuA

seems to be a battery directly heated pentode / beam power tube.
Max ratings:
Vf = 1.25 +/- 20%
If = 20ma
Vp = 45v
Vg2 = 45v
Ik = 1ma

Typical operation:
Vp = 22.5v
Vg2 = 22.5v
Vg1 = -1.5v
Peak grid signal voltage 1.5v
Ip = .45ma
Ig2 = .12ma
Transconductance 400umhos
Rp = .22meg ohm
Rl = .05meg ohm
Distortion = 10%
Power out = 3.75mw

lead 1 = plate (red dot)
lead 2 = G2
lead 3 = F+
lead 4 = G1
lead 5 = F-

G3 (deflector plates) internally connected to filament.

Thanks Ken,
now I'm looking for receiver and or transmitter circuits for this
tube.
Tnks
73
Fred.

Fred wrote:
Thanks Ken,
now I'm looking for receiver and or transmitter circuits for this
tube.
Tnks
73
Fred.

http://schmarder.com/radios/tube/index.htm
He has a project using a sub-mini tube that you could adapt