On Apr 25, 10:51*pm, Tim Wescott wrote:
David wrote:
Was just wandering if anyone has used or experimented with television
IF, Video and Detector coils, most are slug tuned coils that have a
few uh to several hundred uh, some are sheilded some are not, i have
about 500 that i bought years ago, a lot of them look very close too
the old loopstick type coils, looking for
ideas.
Thanks David

They'll have very low Q, and therefore not really be suitable for a
crystal radio, where low-Q coils fight your ability to get good
selectivity without burning up all your signal before it gets to the
headphones.

There's a whole bunch of _other_ cool things you can do with them, just
not Xtal sets.

--

Tim Wescott
Wescott Design Serviceshttp://www.wescottdesign.com

Do you need to implement control loops in software?
"Applied Control Theory for Embedded Systems" was written for you.
See details athttp://www.wescottdesign.com/actfes/actfes.html

What would be a good Q range for AM broadcast & Shortwave bands.
Another thing is that a lot of these coils have only one coil on a
form like an adjustable loopstick, maybe i'll never know unless i try
them. Holding them next to each other they look alike.