Home |
Search |
Today's Posts |
#1
|
|||
|
|||
6 to 1 balun design
I am looking for a 6 to 1 balun, 300 ohms balanced to 50 ohms coax. I
don't need one that handles transmitter power as I am only using it for a receiving antenna. I have on hand several hundred feet of 50 ohm coax, RG58 modified (IEEE 802.3). I want to use it to connect my 300 ohm TV dipole antenna in my attic to my HDTV in the basement. And, of course, I would need a 50 ohm to 75 ohm match at the HDTV. We only watch over-the-air TV. Why? Because I live within 2 miles of three 1000 ft TV towers. In fact, the dipole in the basement works quite well. But I do get dropouts during storms; go figure. I get 17 channels for free, so why go cable or FIOS. Nothing worthwhile there anyway. So can someone point me to a good site for balun design. I've done the Google searches, but all that I find seem to be for high power applications. Any help would be appreciated. Al |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
SWL Newbies : The Magnetic Long-Wire Antenna Balun - A Balun It Ain't | Shortwave | |||
Balun | Antenna | |||
Balun design / SWR ? | Antenna | |||
SWL Balun | Antenna | |||
Horizontal loop - balun or no balun ? | Antenna |