Home |
Search |
Today's Posts |
#14
![]() |
|||
|
|||
![]()
raypsi wrote:
Hey OM If I look at the node of a source of 20mW and connect 10 wires to that node with equal loads, I will have 2mW going down each wire. No matter how I try and add them up I can't get more than 20 mW. Correct. Now I take a 20 mW isotropic emitter, now you're saying I feed a dish with that 20mW emitter through a feed horn and now all of a sudden I have gain, I have more than 20 mW? Not exactly, I am saying you have a gain in power DENSITY i.e watts per sq meter. In a desired direction only, naturally. Like when you use a magnifying glass to collect the Sun's power into a small spot. 73 OM de n8zu |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Dish reflector | Antenna | |||
Dish Network "500" dish with two LNBs | Homebrew | |||
stevie can dish it out but not take it | Policy | |||
Digital Sat dish | Antenna | |||
FS:RCA 18" Sat Dish w/ single LNB | Swap |