LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old August 2nd 03, 04:40 PM
cpemma
 
Posts: n/a
Default

Paul Burridge wrote:
On Sat, 02 Aug 2003 03:25:47 GMT, Active8
wrote:

In article vKBWa.20717$KF1.308575@amstwist00, lid
says...
Paul Burridge wrote:
Hi chaps,

Can anyone suggest a suitable material from which to make an
ultra-flexible mobile whip antenna say about 3 to 4 feet long. I
need something that can be bent to 90 degrees at a very small
radius and still return to reasonable straightness.

I think thin piano wire will give the best results. Place a lot of
them in a flexible tube to gain some thickness and have them
silvered for conductivity - or add a stranded copper wire.

Spring metal strip may also work, especially if you can manage some
type of hinge at the base that allows it to turn when sideways
force is exerted, or if the force is in one plane.


Thomas


what is a tight bend? music wire comes in diff sizes and the number
in the tube and how tightly the tube conforms to it will have an
effect on the flexibility.


Yeah, sorry chaps, I should have better defined what I meant by 'very
small radius'. I compete in radio-controlled model battles, so the
model stands to get fipped upside down from time to time in a very
bruising environment and it already has a very low ground-clearance,
so using a spring as a base mounting won't help much, I'm afraid.
We're talking about radiuses of as little as 5mm! How about the
specific grade of stainless steel in wire form that springs are made
from? I know where I can get hold of some of that....
"I believe history will be kind to me, since I intend
to write it." - Winston Churchill


The alloy is Type 301 (17% chromium, 7% nickel stainless steel) hard drawn
wire, or even better is a 17/7PH (precipitation hardening) grade that our
firm once produced for tank aerials, that also may take a few knocks.

Both (especially the PH grade) need a final heat-treatment (420C for a few
minutes IIRC) for ultimate spring properties, but to get such a tight bend
you'd need quite a thin wire. It's a matter of the proof strain or limit of
proportionality, how much the outer skin can stretch without taking a
permanent set, compared to the neutral central axis, on the bend.



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
Why do WiFi basestations use two antennas? m Equipment 5 October 8th 04 08:57 AM
FS: Connectors, Antennas, Meters, Mounts, etc. Ben Antenna 0 January 6th 04 12:18 AM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 03:01 PM
Are fractal antennas being used in cellphones? totojepast Antenna 16 September 21st 03 07:45 PM


All times are GMT +1. The time now is 07:03 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017