| Home |
| Search |
| Today's Posts |
|
#11
August 2nd 03, 10:55 PM
|
|||
|
|||
On 2 Aug 2003 16:24:24 GMT, Allodoxaphobia
wrote: You might try a section from a steel tape measure. (Just don't select one of the cheap, Made-In-China plastic/mylar ones. HI!HI!) Additionally, try to mount the antenna in a "well" on the robot. Even a well of 5-10 mm will help out. Not sure about the tape measure suggestion, but mounting in a well is something I'd not considered and am most grateful for the idea of! Thanks... -- "I believe history will be kind to me, since I intend to write it." - Winston Churchill |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| Why do WiFi basestations use two antennas? | Equipment | |||
| FS: Connectors, Antennas, Meters, Mounts, etc. | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
| Are fractal antennas being used in cellphones? | Antenna | |||
Threaded Mode
