![]() |
In om, "Bruce Raymond"
wrote: Well you've managed to hit my kill file. Good riddance to your anti-social pap. Gee, I'm hurt. Maybe someday in the future, when you sift through the archives and read this thread again, you might do so with an open technical mind. Oh, and maybe a behavioral therapist holding your hand and to provide counseling for the trauma of learning that not everyone behaves according to the edicts of some middle-aged newspaper columnist. -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
Frank Gilliland wrote: In , "Harry \(SM0VPO\)" wrote: Hi all, I am having a spot of bother with prescaler chips. Basically I need to find one at the right price and availability. US$5 each is reasonable, but where from? Is there one available that is not obsolete? I live in Sweden and my local component shop is ELFA (Swedens answer to RS). They don't sell ANY digital divider that operates above 50MHz, except for the 74F163 and I cannot come up with a reliable interface circuit to couple an oscillator into it at over 100MHz. I found the MB501 (MC12022, SP8704) but it is obsolete and cannot find a reliable source. I bought a couple, but that source dried up. All I need is a divider chip that will accept a small signal up to 150MHz, is available, cheap(ish) and will divide down to under 10MHz so that I can use CMOS to process a synthesiser. A parallel-load synthesiser chip with in-built 150MHz prescaler would do. I have used "Teleport" to download over 50,000 pdf datasheets without any luck. I have gone through most of them, but it takes a fair bit of time. If anyone has a helpful suggestion I would appreciate it. BR from Harry - SM0VPO http://w1.859.telia.com/~u85920178/ harryvpo (at) hotmail (dot) com Man, if THIS ain't a trip -- a well-known, over-rated internet homebrew tech asking for help for a simple prescaler. Over-rated?? Well, Harry's homebrew website is infinitely better than yours ... |
Frank Gilliland wrote: In , "Harry \(SM0VPO\)" wrote: Hi all, I am having a spot of bother with prescaler chips. Basically I need to find one at the right price and availability. US$5 each is reasonable, but where from? Is there one available that is not obsolete? I live in Sweden and my local component shop is ELFA (Swedens answer to RS). They don't sell ANY digital divider that operates above 50MHz, except for the 74F163 and I cannot come up with a reliable interface circuit to couple an oscillator into it at over 100MHz. I found the MB501 (MC12022, SP8704) but it is obsolete and cannot find a reliable source. I bought a couple, but that source dried up. All I need is a divider chip that will accept a small signal up to 150MHz, is available, cheap(ish) and will divide down to under 10MHz so that I can use CMOS to process a synthesiser. A parallel-load synthesiser chip with in-built 150MHz prescaler would do. I have used "Teleport" to download over 50,000 pdf datasheets without any luck. I have gone through most of them, but it takes a fair bit of time. If anyone has a helpful suggestion I would appreciate it. BR from Harry - SM0VPO http://w1.859.telia.com/~u85920178/ harryvpo (at) hotmail (dot) com Man, if THIS ain't a trip -- a well-known, over-rated internet homebrew tech asking for help for a simple prescaler. Over-rated?? Well, Harry's homebrew website is infinitely better than yours ... |
All times are GMT +1. The time now is 09:01 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com