| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
030904 1736 - Lizard Blizzard wrote:
Back then, the radio and TV sets were still using 5U4 TOOBS for rectifiers, whereas the electrical world already had equipment with SCRs up to the size of hockey pucks that could handle up to 1200 amps Imagine the size of the heatsink for that... |
|
#2
|
|||
|
|||
|
indago wrote:
030904 1736 - Lizard Blizzard wrote: Back then, the radio and TV sets were still using 5U4 TOOBS for rectifiers, whereas the electrical world already had equipment with SCRs up to the size of hockey pucks that could handle up to 1200 amps Imagine the size of the heatsink for that... The heatsink is "live" for that style rectifier. It has to be tightened onto the rectifier (sandwitched) using several bolts. There's acually a compression rating - if a certain static force is not present during operation, it will explode... ![]() |
|
#3
|
|||
|
|||
|
indago wrote:
030904 1736 - Lizard Blizzard wrote: Back then, the radio and TV sets were still using 5U4 TOOBS for rectifiers, whereas the electrical world already had equipment with SCRs up to the size of hockey pucks that could handle up to 1200 amps Imagine the size of the heatsink for that... The heatsink is "live" for that style rectifier. It has to be tightened onto the rectifier (sandwitched) using several bolts. There's acually a compression rating - if a certain static force is not present during operation, it will explode... ![]() |
|
#5
|
|||
|
|||
|
Watson A.Name - Watt Sun wrote:
Things with big SCRs, like motor controllers, don't have a heatsink as you would think of it. They use a square tube with fins pointing into the cavity, and fans on the end. And some of them use water-cooled aluminum "cold plates", rather than fans. Bob Weiss N2IXK |
|
#6
|
|||
|
|||
|
Watson A.Name - Watt Sun wrote:
Things with big SCRs, like motor controllers, don't have a heatsink as you would think of it. They use a square tube with fins pointing into the cavity, and fans on the end. And some of them use water-cooled aluminum "cold plates", rather than fans. Bob Weiss N2IXK |
|
#7
|
|||
|
|||
|
In article ,
mentioned... 030904 1736 - Lizard Blizzard wrote: Back then, the radio and TV sets were still using 5U4 TOOBS for rectifiers, whereas the electrical world already had equipment with SCRs up to the size of hockey pucks that could handle up to 1200 amps Imagine the size of the heatsink for that... Things with big SCRs, like motor controllers, don't have a heatsink as you would think of it. They use a square tube with fins pointing into the cavity, and fans on the end. -- @@F@r@o@m@@O@r@a@n@g@e@@C@o@u@n@t@y@,@@C@a@l@,@@w@ h@e@r@e@@ ###Got a Question about ELECTRONICS? Check HERE First:### http://users.pandora.be/educypedia/e...s/databank.htm My email address is whitelisted. *All* email sent to it goes directly to the trash unless you add NOSPAM in the Subject: line with other stuff. alondra101 at hotmail.com Don't be ripped off by the big book dealers. Go to the URL that will give you a choice and save you money(up to half). http://www.everybookstore.com You'll be glad you did! Just when you thought you had all this figured out, the gov't changed it: http://physics.nist.gov/cuu/Units/binary.html @@t@h@e@@a@f@f@l@u@e@n@t@@m@e@e@t@@t@h@e@@E@f@f@l@ u@e@n@t@@ |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| I MAKE LAMPS OUT OF THEM 829B WITH PLATE LINE'S | Boatanchors | |||
| 1819 24 volt lamps | Boatanchors | |||
| Hint on replacement for Yaesu panel lamps | Equipment | |||
| Hint on replacement for Yaesu panel lamps | Equipment | |||