Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old September 4th 03, 08:35 PM
Mad Scientist
 
Posts: n/a
Default hacking radio shack zip zaps cars?

Does anyone know if it's easy to open up one of those little cars and
get at the relays that control the car, to control other things than
the car? (ie hack into a lego mindstorms set, turn on a TV, etc.)
  #2   Report Post  
Old September 4th 03, 08:59 PM
Troglodite
 
Posts: n/a
Default

Does anyone know if it's easy to open up one of those little cars and
get at the relays that control the car, to control other things than
the car? (ie hack into a lego mindstorms set, turn on a TV, etc.)


There aren't any relays these days. Stuff like motors and electromagnets (used
to steer the little ones) are run directly from transistors or chip outputs.

The very tiny HO scale cars have only 3 outputs, all fairly low current and
limited to about 3V. I'm not sure what's in the larger vehicles today, haven't
fooled with one lately. RS used to show the circuit boards for the cars and
transmitters as separate hobby items (with instructions) in their catalog, but
may no longer do so. Why not check out someone like LINX on the Internet, who
make transmitter and receiver modules. Their application notes show many
interface examples.

Doug Moore

  #3   Report Post  
Old September 4th 03, 08:59 PM
Troglodite
 
Posts: n/a
Default

Does anyone know if it's easy to open up one of those little cars and
get at the relays that control the car, to control other things than
the car? (ie hack into a lego mindstorms set, turn on a TV, etc.)


There aren't any relays these days. Stuff like motors and electromagnets (used
to steer the little ones) are run directly from transistors or chip outputs.

The very tiny HO scale cars have only 3 outputs, all fairly low current and
limited to about 3V. I'm not sure what's in the larger vehicles today, haven't
fooled with one lately. RS used to show the circuit boards for the cars and
transmitters as separate hobby items (with instructions) in their catalog, but
may no longer do so. Why not check out someone like LINX on the Internet, who
make transmitter and receiver modules. Their application notes show many
interface examples.

Doug Moore

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Amateur Radio Newsline™ Report 1415 ­ September 24, 2004 Radionews Dx 0 September 24th 04 05:52 PM
Amateur Radio Newsline™ Report 1415 ­ September 24, 2004 Radionews Dx 0 September 24th 04 05:52 PM
Amateur Radio Newsline™ Report 1402 ­ June 25, 2004 Radionews Dx 0 June 25th 04 07:28 PM
Amateur Radio Newsline™ Report 1402 ­ June 25, 2004 Radionews Dx 0 June 25th 04 07:28 PM
Amateur Radio Newsline™ Report 1379 – January 16, 2004 Radionews Dx 0 January 18th 04 09:34 PM


All times are GMT +1. The time now is 12:19 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017