Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
help with 3-500z tube
I have a 3-500z tube and just want to make a conversation piece out of it. I
am going to make a wood base for it and I would also like to feed some current into it just to make it glow.I was told it was possible but he wasn't sure how or which pins to do it with. Also I know it is a 5 volt tube and 14.5 amp.do I really need that much to make it glow? Would 12 volt work? Thanks Rob W8CRZ |
#2
|
|||
|
|||
W8CRZ wrote:
I have a 3-500z tube and just want to make a conversation piece out of it. I am going to make a wood base for it and I would also like to feed some current into it just to make it glow.I was told it was possible but he wasn't sure how or which pins to do it with. Pins 1 and 5. Also I know it is a 5 volt tube and 14.5 amp.do I really need that much to make it glow? Yes, you do. Would 12 volt work? For a very, very limited time, providing your 12V supply is capable of dishing out 40A. If it's not, it would either clamp down to the maximum current or trip the breaker. If all you want to do is make it appear that it's glowing, build in a few LEDs into the wood base. None will be the wiser. 73 .... WA7AA -- Anti-spam measu look me up on qrz.com if you need to reply directly |
#3
|
|||
|
|||
W8CRZ wrote:
I have a 3-500z tube and just want to make a conversation piece out of it. I am going to make a wood base for it and I would also like to feed some current into it just to make it glow.I was told it was possible but he wasn't sure how or which pins to do it with. Pins 1 and 5. Also I know it is a 5 volt tube and 14.5 amp.do I really need that much to make it glow? Yes, you do. Would 12 volt work? For a very, very limited time, providing your 12V supply is capable of dishing out 40A. If it's not, it would either clamp down to the maximum current or trip the breaker. If all you want to do is make it appear that it's glowing, build in a few LEDs into the wood base. None will be the wiser. 73 .... WA7AA -- Anti-spam measu look me up on qrz.com if you need to reply directly |
#4
|
|||
|
|||
Also I know it is a 5 volt tube
and 14.5 amp.do I really need that much to make it glow? Would 12 volt work? ====== Having a 5 volts filament ,requiring 14.5 Amperes ,would make it a nice 70 + Watts (anti-condensation) heater. Applying 12V would turn it in a 'RIP state' within a few seconds. Frank GM0CSZ / KN6WH |
#5
|
|||
|
|||
Also I know it is a 5 volt tube
and 14.5 amp.do I really need that much to make it glow? Would 12 volt work? ====== Having a 5 volts filament ,requiring 14.5 Amperes ,would make it a nice 70 + Watts (anti-condensation) heater. Applying 12V would turn it in a 'RIP state' within a few seconds. Frank GM0CSZ / KN6WH |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Need "Original" (1937 era) 6U5 Tuning Eye Tube | Boatanchors | |||
F.S. EICO 667 Tube Tester | Equipment | |||
F.S. EICO 667 Tube Tester | Equipment | |||
Tube tester query? | Boatanchors | |||
FS: Old tube sockets, 4, 5, 6, 7 pin, Hammurlund, GR, ceramic, phenolic,matching plugs, extenders | Boatanchors |