About Us

February 13th 04, 02:04 AM

On 11 Feb 2004 05:59:20 GMT, (Avery Fineman)
wrote:

A rule of thumb says that the screen around an oscillator coils could
be 3 times the coil diameter, and Radiotron Designer's handbook, 3rd
edition, 1941 says that the screen should go at least one coil radius
above the coil. But how far from the chassis should the coil winding
start?

About the same distance. :-) The old Radiotron book (I have a CD
for one of the editions as a keepsake) has charts showing the
inductance reduction and Q reduction for various relative diameters.
The closer the enclosure, the more reduction of both values. That
sould be accounted for in any resonant applications, especially those
for tracking as in superhet or TRF front-ends.

The conducting enclosure or shield contains the magnetic field on the
coil and, ideally, should have the same clearange from both top and
bottom of the winding. It will still work with an assymetric clearance
but L and Q are spoiled by the closer spacing.

Well, I forgot to say that I would leave the top side open, so it is
somewhat more distance from the hot side of coil to the metal surface
than in the bottom, but thanks to all for the reply

Toroidal cores are much less affected by conducting enclosures due to
the magnetic field contained largely IN the torus' core material.

Len Anderson
retired (from regular hours) electronic engineer person

on this side you you are put in an office landscape and all the tool
is a PC with Microsoft programs, soldering iron is not permitted any
more, you just have to be constructive, hi, so I now prefer thermionic
valves at home

73

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coils or specifications needed for Heathkit GD-1B Grid Dip Meter.	Bob	Equipment	9	August 15th 04 03:42 PM
Coils or specifications needed for Heathkit GD-1B Grid Dip Meter.	Bob	Equipment	0	August 12th 04 09:36 AM
Coils or specifications needed for Heathkit GD-1B Grid Dip Meter.	Bob	Equipment	0	August 12th 04 09:36 AM
National SW-3 coil winding data	John H. Gindlesberger	Boatanchors	0	March 17th 04 08:00 PM
phasing coils		Antenna	2	July 25th 03 05:06 AM

Menu

About Us