Home |
Search |
Today's Posts |
#14
![]() |
|||
|
|||
![]()
duckman wrote:
Had a question for open discussion Is there available, can it be done to have an AM and/ and or FM transmitter that will broadcast over the entire AM and FM broadcast band at the same time. Or at least multiple stations. E.G. From 88 - 108 at once or 88-98, then 98-108 Same on AM band. It would have to be a low power to be able to be used on private property and limiy range to 300 mtrs Can this be done, where can l buy it, or how do l make it Told you it was a dousy of a question, whats your thoughts. Conceptually, you're describing something similar to ODFM, used in 802.11(a) and (g). Basically, you create numerous independently modulated carriers across a band, combine them and amplify them. If you're intent on transmitting the same information on each carrier, then I suppose a simplifying trick might be to produce a comb, but the general case is basically identical to something that exists already. Now, here's a question that follows - suppose you built an ODFM transmitter that was able to place a signal on each 'channel' in the FM broadcast band. What could power-level/signal-strength would be permitted under Part 15? Would the aggregate ODFM signal be considered a single signal for Part 15 purposes, or would each 'channel' be considered an independent signal (since, technically, it is)? Dana |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
EICO 720 Transmitter.....Anyone ever use one of these?????? | Boatanchors | |||
transmitter question - its a dousy | Equipment | |||
transmitter question - its a dousy | Equipment | |||
Newbie qrp homebrew transmitter; another question | Homebrew | |||
Newbie qrp homebrew transmitter; another question | Homebrew |