Menu

Field Strength

Search this Thread

Prev

Previous Post

Next Post

Next

#11

Report Post

Old

December 14th 03, 03:18 AM

Active8

Posts: n/a

Default

On Sat, 13 Dec 2003 17:39:27 -0800, said...
It's too bad it isn't that simple.

A 1V/m field doesn't result in one volt at the feedpoint of a perfectly
matched one meter dipole or monopole, and the value it does induce
depends on the quality of the impedance match

you mean antenna to free space, right?

as well as the fraction of
a wavelength the one meter antenna length represents.

amplify, very please. por favor. Refresh my ram.

| E(uV/m) |
V (dBmV) = 20log | --------- / 1000 |
| 0.021f(MHz) |

plus correction for distance (regulations for limits are for
specific measuring distances), etc. I'll mull the above eq over.
Gotta figure out where the .021 came from, but not now. My eyes are
getting fatigued from this 'puter.

And, if one volt
does appear at the feedpoint, it's very unlikely that a simple circuit
will measure it as one volt.

It would have to be calibrated to compensate for the circuit. Maybe
that's why it's called a "relative" field strength meter. Relative
to another signal or no signal

Probably best to stick with your $1.5 kilobuck meter if you really want
to measure field strength.

I don't. He does

At least not tonight. But my SLM *will* measure
field strenth using a cheap ass dipole cut to the frequency of
interest with or without an external preamp and do it to the
satisfaction of the FCC, assuming it's calibrated. I even have a
near-field probe, not so cheap. It beats guess work.

I wouldn't expect his sniffer to be real accurate but he did ask
for guesstimates. Started off as "around 4 feet" for a half watter
now we're at 100mW - prob his reference Tx.

BRs,
Mike

Roy Lewallen, W7EL

Active8 wrote:
On 13 Dec 2003 03:50:41 -0800, said...

What you are descrbing is a "signal sniffer", not a signal strength meter.

Who are you replying to? Paul did not say Signal Stength Meter, but
the guy you replied to kinda hints at it when he mentions power
level.

I would have to say that my 1GHz Signal Level Meter, which cost
$1500 would be the better than a relative field strength meter, but
if he measures say, 1V with his Tx off and 2V with it on, then
that's 1V and if his Rx antenna is a 1m dipole, that's 1V/m.

Mike

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Current in loading coil, EZNEC - helix	Yuri Blanarovich	Antenna	334	November 9th 04 05:45 PM
Why doesn't maximum field strength and minimum SWR occur at the same frequency?	nathan	Antenna	17	November 21st 03 12:34 AM
Modifying Lafayette SWR & Field Strength meter?	Ken	Equipment	6	September 21st 03 07:33 PM
How was antenna formula for uV/Meter Derived?	Roy Lewallen	Antenna	21	July 31st 03 09:04 AM

All times are GMT +1. The time now is 12:09 PM.

About Us

"It's about Radio"

Contact Us RadioBanter forum home Privacy Statement

Copyright © 2017