LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #3   Report Post  
Old January 20th 04, 10:58 AM
Paul Burridge
 
Posts: n/a
Default

On Tue, 20 Jan 2004 00:51:33 -0000, (Dave Platt)
wrote:


I believe I saw an error of that sort, if I tried to create a
connection between an individual link, and a multi-signal bus. You
can only do this if the thing you're trying to hook up, has a name
which matches the name of an element of the bus.


I can't see the point of this disadvantage.

Hmmm. On the version of Eagle Lite Freeware (Linux) that I have on my
laptop, the autorouter works just fine.


It's disabled on this PC/Windoze version for some reason!

I started with a small battery float-charger schematic I had sitting
around, did a "switch to board", let the program throw the components
down off-board in random locations, dragged the components to the
board and then rotated them to minimize the amount of
signal-connection crossing. I then used "Tools/Auto", approved all of
the defaults, and it routed the whole board in about ten seconds.


The "helpfile" says you can move the components to the board, position
them, click on 'ratsnest' to get "airwires" to appear between the
relevant nodes, then do the tools/auto bit and get the defaults you
specify, then click "go" and the routing is automatically done.
Unfortunately, however, no airwires appear, nor do any tracks. Nothing
happens and the "helpfile" says autorouter isn't a working function in
the Lite version! So far I can't say I'm exactly impressed...

You _did_ create both a schematic, and a board layout, as part of the
same design? All of the components fit within the outlines of the
largest board that the Lite version will create?


Yes.

--

My opinion is worth what you've paid for it.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Noise and Loops Question Tony Angerame Antenna 4 August 24th 04 10:12 PM
Stupid question G5RV Ken Bessler Antenna 17 January 9th 04 12:06 PM
transmitter question - its a dousy duckman Homebrew 0 December 8th 03 11:51 PM
Yagi / Beam antenna theory question... Nick C Antenna 12 October 5th 03 12:15 PM
Question about attenuators ... Doug McLaren Antenna 2 August 31st 03 04:20 AM


All times are GMT +1. The time now is 09:40 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017