30 meter beacon run this weekend
 

Hi all,

I'll be operating my 30 meter 100 mW CW beacon this weekend. The frequency
will be 10.146 MHZ. Operating time will be on Saturday from early morning
to about 2300Z. On Sunday from early morning to around 0300Z.

Details on the beacon are located at
http://www.geocities.com/n2uhc_2/30m_bcn.html . Please send a reception
report to me at . Please include your QTH, time you heard
it, and how well you heard it. I'll respond with a QSL via email, or if you
would like a paper copy please request one & include your address.

The antenna is a 30 meter dipole set up in an inverted-V style, with legs
pointing N-S.

Thanks.

--
Tom Sevart N2UHC
Frontenac, KS
http://www.geocities.com/n2uhc

My 30 meter 100 mW beacon is running now on 10.146 MHZ. Antenna is a 30
meter inverted V. The beacon will be running until 1900Z tonight, then all
day tomorrow until about 0300Z.

Please send reception reports to , please include UTC time
you hear it and your location. Results to be posted later.


--
Tom Sevart N2UHC
Frontenac, KS
http://www.geocities.com/n2uhc

Hi Tom

In Central Indiana, all I have on your beacon freq is some digital stuff.

Dang it.

I have some 10.113 HC49 crystals ...would you want one?


"Tom Sevart" wrote in message
...
Hi all,

I'll be operating my 30 meter 100 mW CW beacon this weekend. The
frequency
will be 10.146 MHZ. Operating time will be on Saturday from early morning
to about 2300Z. On Sunday from early morning to around 0300Z.

Details on the beacon are located at
http://www.geocities.com/n2uhc_2/30m_bcn.html . Please send a reception
report to me at . Please include your QTH, time you heard
it, and how well you heard it. I'll respond with a QSL via email, or if
you
would like a paper copy please request one & include your address.

The antenna is a 30 meter dipole set up in an inverted-V style, with legs
pointing N-S.

Thanks.

--
Tom Sevart N2UHC
Frontenac, KS
http://www.geocities.com/n2uhc

"Basil Cochrane" wrote in message
ink.net...
Hi Tom

In Central Indiana, all I have on your beacon freq is some digital stuff.

Dang it.

I have some 10.113 HC49 crystals ...would you want one?


I think I can get the frequency down to around 10.139 or .138 by adding a
turn or two to the coil and changing capacitors. Before I run the beacon
again, I'll do some experimenting.

Tom

Results of this weekend's beacon run can be found at
http://www.geocities.com/n2uhc_2/30m_bcn_rslts.html


--
Tom Sevart N2UHC
Frontenac, KS
http://www.geocities.com/n2uhc

"Tom Sevart" wrote in message
...
My 30 meter 100 mW beacon is running now on 10.146 MHZ. Antenna is a 30
meter inverted V. The beacon will be running until 1900Z tonight, then
all
day tomorrow until about 0300Z.

Please send reception reports to , please include UTC time
you hear it and your location. Results to be posted later.

Why not join the HiFer group on 13.555 MHz. I readily copy these 1-3mW
beacons both by ear and ARGO QRSS3.

Dale W4OP