"Rambo" wrote in message
...
Correct..Servisol is the way to go. But if the track is worn or
damaged then replacement is the only long term solution.

But someone must have manufactured the track in the first place, so it
should not be beyond the bounds of possibility for us to attempt such.

On Sun, 22 Nov 2015 22:25:29 -0000, "gareth"
wrote:

"Rambo" wrote in message
.. .
Correct..Servisol is the way to go. But if the track is worn or
damaged then replacement is the only long term solution.

But someone must have manufactured the track in the first place, so it
should not be beyond the bounds of possibility for us to attempt such.

Well it's going to very difficult to find and if you do it'll be very
expensive to buy an OEM part.

On Sun, 22 Nov 2015 23:19:48 +0000, Rambo
wrote:

On Sun, 22 Nov 2015 22:25:29 -0000, "gareth"
wrote:

"Rambo" wrote in message
. ..
Correct..Servisol is the way to go. But if the track is worn or
damaged then replacement is the only long term solution.

But someone must have manufactured the track in the first place, so it
should not be beyond the bounds of possibility for us to attempt such.

Well it's going to very difficult to find and if you do it'll be very
expensive to buy an OEM part.
I will admit to owning one of these in the past...
http://foxtango.org/frg7700/FRoG-7700.htm
may be usefull.

"Rambo" wrote in message
...
On Sun, 22 Nov 2015 23:19:48 +0000, Rambo
wrote:

On Sun, 22 Nov 2015 22:25:29 -0000, "gareth"
wrote:

"Rambo" wrote in message
...
Correct..Servisol is the way to go. But if the track is worn or
damaged then replacement is the only long term solution.

But someone must have manufactured the track in the first place, so it
should not be beyond the bounds of possibility for us to attempt such.

Well it's going to very difficult to find and if you do it'll be very
expensive to buy an OEM part.
I will admit to owning one of these in the past...
http://foxtango.org/frg7700/FRoG-7700.htm
may be usefull.

I have the maintenance manual for it plus the ATU and the 2m converter.

"Rambo" wrote in message
...
On Sun, 22 Nov 2015 22:25:29 -0000, "gareth"
wrote:

"Rambo" wrote in message
. ..
Correct..Servisol is the way to go. But if the track is worn or
damaged then replacement is the only long term solution.

But someone must have manufactured the track in the first place, so it
should not be beyond the bounds of possibility for us to attempt such.

Well it's going to very difficult to find and if you do it'll be very
expensive to buy an OEM part.

No, I meant to try to manufacture such a part ourselves.