LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #13   Report Post  
Old February 23rd 04, 09:45 AM
Paul Burridge
 
Posts: n/a
Default

On 22 Feb 2004 15:50:35 -0800, (Tom Bruhns) wrote:

But in reply to Paul, I'd ask: Do you understand how the "full-wave
rectifier doubler" works, basically? (Ideal waveforms and all that.)


IFAIA, pretty much the same as a full-wave rectifier in a PSU. All the
negative going half-cycles are converted to postitive going
half-cycles that 'slot in' between the unmodified positive half
cycles. The resulting waveform is twice the original frequency and
subsequent signal processing can restore this half-wave signal back to
a full sine wave of the desired output frequency.

Do you have a data sheet for the 1N4148?


I could get one off the good old 'net. Aw, **** it; I'll get one. Hang
on a minute..... Got it!

What items from the data
sheet do you suppose might limit the useful frequency?


Primarily junction capacitance, I guess. In this instance, 4pF.
There's also something called transit time, IIRC, which is relevant,
but for some reason it's not mentioned on the DS.

Can you make
an estimate, based on the data sheet numbers?


Nope. Maybe from the graphs, though...

What would you do in a
design to extend the frequency range for a given diode characteristic?
For example, what does diode capacitance do to circuit operation?


More slows it down.

What does reverse recovery do?


Slower recovery the same, I guess. I'm not totally familiar with this
parameter but it would make sense.

In the full-wave frequency doubler
circuit, what does the input impedance look like, assuming an ideal
transformer, when one diode is forward biased and the other is
reverse-recovering? Can you think of parts to add to cause that to
not be so much of a problem (assuming it is a problem)?


Totally beyond me at this stage, I'm afraid!

--

The BBC: Licensed at public expense to spread lies.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Drake TR-3 transceiver synthesizer upgrade Gene Gardner Homebrew 2 January 15th 04 02:17 AM
Drake TR-3 transceiver synthesizer upgrade Gene Gardner Homebrew 0 January 13th 04 05:28 PM
Single Sideband FM Bruce Kizerian Homebrew 84 October 27th 03 05:52 AM


All times are GMT +1. The time now is 02:17 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017