"Bob Monaghan" wrote in message
...

Greetings,

I would like to use a ceramic 8 lead LCC device (accelerometer) in a
project but wonder on the best way to mount and use it in a one-off
project? The device is 5x5mm square, three contacts on each side and one
contact on top and one on the bottom (total 8). So we are dealing with 1mm
spacing - eeek! ;-)

I used a SMD prototype board with the pads 1.27 mm apart. As it are only 3
pad, you get away with the difference in pitch.
Wim
..