Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old April 23rd 04, 11:44 AM
Richard Hosking
 
Posts: n/a
Default

Yeah sure
I had to go my local supplier when I asked for samples

Richard


I'd like to see a kit or circuit board based on the 9954. BTW you can
get these as samples for just a little begging. Analog Devices likes to
send samples to hams.


  #2   Report Post  
Old April 23rd 04, 05:08 PM
Highland Ham
 
Posts: n/a
Default

Yeah sure
I had to go my local supplier when I asked for samples

====================================
AD sends free samples when you order through the web ,destined for a US
address
I did that through a relative in LA who send the samples privately to me
here in Scotland.

However a ham working for AD -UK commented on this NG that AD-UK would be
sympathetic to requests for free samples ,but I haven't tried that route as
yet.

Frank GM0CSZ / KN6WH


  #3   Report Post  
Old April 24th 04, 02:34 AM
Ken Scharf
 
Posts: n/a
Default

Highland Ham wrote:
Yeah sure
I had to go my local supplier when I asked for samples


====================================
AD sends free samples when you order through the web ,destined for a US
address
I did that through a relative in LA who send the samples privately to me
here in Scotland.

However a ham working for AD -UK commented on this NG that AD-UK would be
sympathetic to requests for free samples ,but I haven't tried that route as
yet.

Frank GM0CSZ / KN6WH


If you go to their website and sign up for their mailing list,
you will get a 'bingo card' every few months that you can send
back for free samples and info on new products, which often
includes DDS circuits, as well as A/D, D/A, and op amps. I have
also got samples of these, and some of their analog switches,
wide band amps, and mixer circuits. BTW they also make an
interresting driver amp for ADSL that looks like a low power
linear rf final amp good for a QRP rig.
  #4   Report Post  
Old April 24th 04, 02:34 AM
Ken Scharf
 
Posts: n/a
Default

Highland Ham wrote:
Yeah sure
I had to go my local supplier when I asked for samples


====================================
AD sends free samples when you order through the web ,destined for a US
address
I did that through a relative in LA who send the samples privately to me
here in Scotland.

However a ham working for AD -UK commented on this NG that AD-UK would be
sympathetic to requests for free samples ,but I haven't tried that route as
yet.

Frank GM0CSZ / KN6WH


If you go to their website and sign up for their mailing list,
you will get a 'bingo card' every few months that you can send
back for free samples and info on new products, which often
includes DDS circuits, as well as A/D, D/A, and op amps. I have
also got samples of these, and some of their analog switches,
wide band amps, and mixer circuits. BTW they also make an
interresting driver amp for ADSL that looks like a low power
linear rf final amp good for a QRP rig.
  #5   Report Post  
Old April 25th 04, 09:02 PM
Duncan Clark
 
Posts: n/a
Default

In message 8rbic.539$yd1.296@newsfe1-win, Highland Ham
writes
Yeah sure
I had to go my local supplier when I asked for samples

====================================
AD sends free samples when you order through the web ,destined for a US
address I did that through a relative in LA who send the samples
privately to me here in Scotland.

However a ham working for AD -UK commented on this NG that AD-UK would
be sympathetic to requests for free samples ,but I haven't tried that
route as yet.


Worked for me over the web. Shipped out of Holland to the UK by courier!

Duncan
G4ELJ
--
Duncan Clark


  #6   Report Post  
Old April 25th 04, 09:02 PM
Duncan Clark
 
Posts: n/a
Default

In message 8rbic.539$yd1.296@newsfe1-win, Highland Ham
writes
Yeah sure
I had to go my local supplier when I asked for samples

====================================
AD sends free samples when you order through the web ,destined for a US
address I did that through a relative in LA who send the samples
privately to me here in Scotland.

However a ham working for AD -UK commented on this NG that AD-UK would
be sympathetic to requests for free samples ,but I haven't tried that
route as yet.


Worked for me over the web. Shipped out of Holland to the UK by courier!

Duncan
G4ELJ
--
Duncan Clark
  #7   Report Post  
Old April 23rd 04, 05:08 PM
Highland Ham
 
Posts: n/a
Default

Yeah sure
I had to go my local supplier when I asked for samples

====================================
AD sends free samples when you order through the web ,destined for a US
address
I did that through a relative in LA who send the samples privately to me
here in Scotland.

However a ham working for AD -UK commented on this NG that AD-UK would be
sympathetic to requests for free samples ,but I haven't tried that route as
yet.

Frank GM0CSZ / KN6WH


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
I have a dumb question about antenna building [email protected] Antenna 23 January 16th 05 11:39 PM
Building a 51 mhz inverted V - feedpoint question....Help! Ken Bessler Antenna 1 July 4th 04 06:24 PM
Building Recommentations... Lots of em ;-) Vaughn Combs Homebrew 4 January 3rd 04 01:54 PM
WWII Spy or Clandestine Radio Building Contest Wa4uso Homebrew 2 November 28th 03 04:06 PM
WWII Spy or Clandestine Radio Building Contest Wa4uso Homebrew 0 November 28th 03 03:33 PM


All times are GMT +1. The time now is 11:07 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017