LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #14   Report Post  
Old May 2nd 04, 11:37 PM
John Crighton
 
Posts: n/a
Default

On Sun, 02 May 2004 14:08:38 +0100, Paul Burridge
wrote:

On Sun, 02 May 2004 02:43:18 GMT, (John Crighton)
wrote:


Hello Paul,
what is the brand name and model number of your RF signal generator.
Can you descibe the socket to us.


Thanks John (and others).

The model number ain't gonna mean a lot to anyone as this is a very
old piece of kit (1950s) that I keep mainly out of a sense of
reverence for the past. :-) It's an old ex-RAF AVO. I have posted a
picture of the socket to a.b.s.e under this same thread title...
BTW, there's a 5p coin shown for scale, but since that won't mean much
to anyone outside Britain, the outer of the socket is approx. 1" in
diameter (which won't mean much to anyone in europe but it serves them
right for adopting the metric system.:-))

--

The BBC: licenced at public expense to spread lies.


Go on, tell us the model number, there are a lot of us
still interested in boat anchor style test equipment.

Is this unit similar to your sig gen
http://www.thevalvepage.com/testeq/avo/sg3/sg3.htm
http://www.thevalvepage.com/testeq/testeq.htm
Unfotunately the connector has been removed and a
BNC type fitted.

I am guessing that you want to keep the original connector
on the sig gen and find a matching connector to make a
short test lead. Old Style connector to BNC.
My news group service doesn't allow me to see the group
a.b.s.e Pity. So I can not see the picture you posted.

So, what are the results of connecting your ohm meter
to the RF out put connector (with the unit switched off)
and measuring the resistance on all attenuator positions.

On one of the lower frequency ranges when you connect
up your cro via a "T" piece to the sig gen with say a 75
ohm load. Does the output level jump up to double
when the load is removed?

Repeat the experiment with a 50 ohm load. If the voltage
doubles from loaded to no load, you will be laughing.
But I don't think you will be that lucky.

I am guessing it will be closer to 75 ohm output impedance.

Try different value loads and let us know how you got on.

Cheerio,
John Crighton
Sydney

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tx Source Impedance & Load Reflections Richard Fry Antenna 8 May 28th 04 06:29 PM
Tuna Tin (II) output impedance Gary Morton Homebrew 42 January 6th 04 10:31 PM
Tuna Tin (II) output impedance Gary Morton Homebrew 0 January 3rd 04 12:38 AM
74HC series RF output impedance Joe McElvenney Homebrew 0 October 12th 03 03:23 PM
Reflection Coefficient Smoke Clears a Bit Dr. Slick Antenna 126 September 10th 03 04:26 PM


All times are GMT +1. The time now is 11:13 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017